Organisation for Economic Co-operation and Development

The OECD-WTO Balanced Trade in Services (BaTIS) dataset is a complete, consistent, and balanced matrix of international trade in services statistics (ITSS). It contains annual bilateral data covering 202 reporters and partners, broken down by the 12 main EBOPS2010 (BPM6) categories from 2005 to 2021. BaTIS is the result of joint efforts by the OECD and WTO. Two main features enable BaTIS to stand out as the international benchmark for any analysis on international trade in services:BaTIS is complete and consistent. At present, only about 63% of world trade in services is bilaterally specified, and the percentage is even lower for the individual service categories. The OECD-WTO methodology leverages all available official statistics and combines them with estimations and adjustments to provide users with a complete matrix covering virtually all economies in the world.BaTIS is balanced. To resolve the asymmetries between reported and mirror flows, exports and imports are reconciled by calculating a symmetry-index weighted average between the two, following a similar approach to that developed for international merchandise trade statistics. BaTIS provides 3 adjustments for each trade flow:Reported. Reflects the value officially reported by the country (where available), some values are rescaled to fit world totals.Adjusted and/or imputed. Reflects, in addition to the reported values, any adjustments made to ensure internal consistency as well as the estimations made by the OECD-WTO to fill in the gaps in the reported information.Balanced. Reflects the reconciled bilateral trade flow, where exports equal mirror imports. Official information on bilateral trade flows was collected from OECD, Eurostat, national sources as well as UNSD. The WTO-UNCTAD trade in services dataset, based on a number of primary sources complemented with estimations, was the main source for data with partner world. The BaTIS dataset can be used as a stand-alone input for economic analysis and policy-making. In addition, balanced trade in services data form an essential input to the OECD Trade in Value Added (TiVA) initiative, for which a balanced view of international trade is crucial. BaTIS is intended to be regularly updated and constantly improved as new data become available. For more information on the methodology, please refer to the working paper accompanying this dataset The OECD-WTO Balanced Trade in Services (BaTIS) For more information on balanced trade statistics, please go to the topic related OECD page Balanced trade statistics Users are encouraged to send their questions, or to signal any apparent errors, regarding this database to [email protected]://www.oecd.org/sdd

The objective of the CRS Aid Activity database is to provide a set of readily available basic data that enables analysis on where aid goes, what purposes it serves and what policies it aims to implement, on a comparable basis for all DAC members. Data are collected on individual projects and programmes. Focus is on financial data but some descriptive information is also made available.

This dataset FDI by counterpart area and by economic activity, BMD4 includes inward and outward Foreign Direct Investment (FDI) flows, positions and income by partner country and by economic activity for OECD reporting economies. It is a simplified dataset with fewer breakdowns compared to the other separate datasets specifically dedicated to FDI flows, FDI positions or FDI income by counterpart area, or by economic activity. In this dataset, FDI exclude resident SPEs, when they exist (unless otherwise stated, see metadata attached at the reporting country level); and inward FDI positions are allocated to the ultimate counterpart country when available (see metadata attached at the reporting country level). Inward and outward FDI statistics in this dataset are presented on a directional basis (unless otherwise stated, see metadata attached at the reporting country level); they are measured in USD millions, in millions of national currency and as a share of total (for FDI positions only). This dataset supports FDI indicators by counterpart area and by economic activity available from the OECD Data Portal. In 2014, many countries implemented the latest international standards for Foreign Direct Investment (FDI) statistics:the OECD’s Benchmark Definition of FDI, 4th edition (BMD4); andthe IMF’s Balance of Payments and International Investment Position Manual, 6th edition (BPM6) This OECD database was launched in March 2015 which includes the data series reported by national experts according to BMD4. The data are for the most part based on balance of payments statistics published by Central Banks and Statistical Offices following the recommendations of the IMF’s BPM6 and the OECD’s BMD4. However, some of the data relate to other sources such as notifications or approvals.

This dataset FDI by counterpart area and by economic activity, BMD4 and historical BMD3 includes long time series of FDI statistics by partner country and by industry. It uses available BMD4 series and combines them with BMD3 historical series (from the unrevised OECD FDI datasets according to BMD3) as far back as 2005 and identifies breaks in series. For selected countries, breaks in series were removed as there was no significant impact of BMD4 implementation. In this dataset, inward and outward FDI flows, positions and income include resident SPEs when they exist (unless otherwise stated, see metadata attached at the reporting country level); and they are allocated to the immediate counterpart country (unless otherwise specified, see metadata attached at the reporting country level). Inward and outward FDI statistics in this datset are presented on a directional basis (unless otherwise stated, see metadata attached at the reporting country level); they are measured in USD millions, in millions of national currency and as a share of total (for FDI positions only). In 2014, many countries implemented the latest international standards for Foreign Direct Investment (FDI) statistics:the OECD’s Benchmark Definition of FDI, 4th edition (BMD4); andthe IMF’s Balance of Payments and International Investment Position Manual, 6th edition (BPM6) This OECD database was launched in March 2015 which includes the data series reported by national experts according to BMD4. The data are for the most part based on balance of payments statistics published by Central Banks and Statistical Offices following the recommendations of the IMF’s BPM6 and the OECD’s BMD4. However, some of the data relate to other sources such as notifications or approvals.

This dataset FDI flows by counterpart area, BMD4 includes inward and outward Foreign Direct Investment (FDI) flows by partner country for OECD reporting economies: Inward FDI flows by partner country measure the value of cross-border direct investment transactions received by the reporting economy during a year, by source country, enabling, for example, the identification of the major sources of FDI for a specific OECD economy in that year. Inward FDI flows are allocated to the immediate investing country. Outward FDI flows by partner country measure the value of cross-border direct investment transactions from the reporting economy during a year, by destination country or region, enabling, for example, the identification of the major destinations of FDI for a specific OECD economy in that year. Outward FDI flows are allocated to the immediate counterpart country for all OECD countries. Inward and outward FDI flows by partner country are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions and in millions of national currency.

This dataset FDI flows by economic activity, BMD4 includes inward and outward Foreign Direct Investment (FDI) flows by economic activity for OECD reporting economies:Inward FDI flows by economic activity measure the value of cross-border direct investment transactions received by the reporting economy in a specific industry during a year, enabling, for example, the identification of the most attractive industries for FDI in each OECD economy in that year.Outward FDI flows by economic activity measure the value of cross-border direct investment transactions from the reporting economy during a year, by industry. The industry sector corresponds to the activity of the direct investment enterprise or to the activity of the direct investor (more details on the activity allocation method for outward FDI flows are indicated in the metadata information attached at the country level). Inward and outward FDI flows by economic activity are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions and in millions of national currency. A cross-classification of inward and outward FDI flows by major ISIC4 sections and by main geographic aggregates are also available for some OECD reporting economies. In 2014, many countries implemented the latest international standards for Foreign Direct Investment (FDI) statistics:the OECD’s Benchmark Definition of FDI, 4th edition (BMD4); andthe IMF’s Balance of Payments and International Investment Position Manual, 6th edition (BPM6) An OECD database was launched in March 2015 which includes the data series reported by national experts according to BMD4. The data are for the most part based on balance of payments statistics published by Central Banks and Statistical Offices following the recommendations of the IMF’s BPM6 and the OECD’s BMD4. However, some of the data relate to other sources such as notifications or approvals. Historical and unrevised series of FDI flows by economic activity under the previous BMD3 methodology can be accessed in the archived dataset FDI flows by industry.

This dataset FDI income by economic activity, BMD4 includes Foreign Direct Investment (FDI) payments and receipts by economic activity for OECD reporting economies:FDI income payments (or income on inward FDI) by economic activity measure the total returns within a year on direct investment stocks paid by enterprises in the reporting economy, in a specific industry, to their foreign investors.FDi income receipts (or income on outward FDI) by economic activity measure the total returns within a year on direct investment stocks received by investors in the reporting economy from their direct investment enterprises abroad, by industry. The industry sector corresponds to the activity of the direct investment enterprise or to the activity of the direct investor (more details on the activity allocation method for FDI income receipts are indicated in the metadata information attached at the country level). Income payments and receipts (or income on inward and outward FDI respectively) by economic activity are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions and in millions of national currency. In 2014, many countries implemented the latest international standards for Foreign Direct Investment (FDI) statistics:the OECD’s Benchmark Definition of FDI, 4th edition (BMD4); andthe IMF’s Balance of Payments and International Investment Position Manual, 6th edition (BPM6) This OECD database was launched in March 2015 which includes the data series reported by national experts according to BMD4. The data are for the most part based on balance of payments statistics published by Central Banks and Statistical Offices following the recommendations of the IMF’s BPM6 and the OECD’s BMD4. However, some of the data relate to other sources such as notifications or approvals.

This dataset FDI positions by counterpart area, BMD4 includes inward and outward Foreign Direct Investment (FDI) positions by partner country for OECD reporting economies:Inward FDI positions by partner country measure the total level of direct investment in the reporting economy at the end of the year, by source countries, enabling, for example, the identification of the major sources of FDI for a specific OECD economy. Inward FDI positions are allocated to the immediate investing country but inward FDI positions allocated to the ultimate investing country are also available for some OECD economies.Outward FDI positions by partner country measure the total level of direct investment from the reporting economy at the end of the year, by destination countries, enabling, for example, the identification of the major destinations of FDI for a specific OECD economy. Outward FDI positions are allocated to the immediate counterpart country for all OECD countries. Inward and outward FDI positions by partner country are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions, in millions of national currency and as a share of total FDI positions. In 2014, many countries implemented the latest international standards for Foreign Direct Investment (FDI) statistics:the OECD’s Benchmark Definition of FDI, 4th edition (BMD4); andthe IMF’s Balance of Payments and International Investment Position Manual, 6th edition (BPM6) This OECD database was launched in March 2015 which includes the data series reported by national experts according to BMD4. The data are for the most part based on balance of payments statistics published by Central Banks and Statistical Offices following the recommendations of the IMF’s BPM6 and the OECD’s BMD4. However, some of the data relate to other sources such as notifications or approvals. Historical and unrevised series of FDI positions by counterpart area under the previous BMD3 methodology can be accessed in the archived dataset FDI positions by partner country.

This dataset FDI positions by economic activity, BMD4 includes inward and outward Foreign Direct Investment (FDI) positions by economic activity according to ISIC4 for OECD reporting economies:Inward FDI positions by economic activity measure the total level of direct investment in a specific industry of the reporting economy at the end of the year, enabling, for example, the identification of the most attractive industry sectors for FDI in each OECD economy.Outward FDI positions by economic activity measure the total level of direct investment from the reporting economy at the end of the year, by industry sector. The industry sector corresponds to the activity of the direct investment enterprise or to the activity of the direct investor (more details on the activity allocation method for outward FDI positions are indicated in the metadata information attached at the country level). Inward and outward FDI positions by economic activity are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions, in millions of national currency and as a share of total FDI positions. A cross-classification of inward and outward FDI positions by major ISIC4 sections and by main geographic aggregates are also available for some OECD reporting economies. In 2014, many countries implemented the latest international standards for Foreign Direct Investment (FDI) statistics:the OECD’s Benchmark Definition of FDI, 4th edition (BMD4); andthe IMF’s Balance of Payments and International Investment Position Manual, 6th edition (BPM6) This OECD database was launched in March 2015 which includes the data series reported by national experts according to BMD4. The data are for the most part based on balance of payments statistics published by Central Banks and Statistical Offices following the recommendations of the IMF’s BPM6 and the OECD’s BMD4. However, some of the data relate to other sources such as notifications or approvals. Historical and unrevised series of FDI positions by economic activity under the previous BMD3 methodology can be accessed in the archived dataset FDI positions by industry.

The FDI Regulatory Restrictiveness Index (FDI Index) measures statutory restrictions on foreign direct investment across 22 economic sectors. It gauges the restrictiveness of a country’s FDI rules by looking at the four main types of restrictions on FDI: 1) Foreign equity limitations; 2) Discriminatory screening or approval mechanisms; 3) Restrictions on the employment of foreigners as key personnel and 4) Other operational restrictions, e.g. restrictions on branching and on capital repatriation or on land ownership by foreign-owend enterprises. Restrictions are evaluated on a 0 (open) to 1 (closed) scale. The overall restrictiveness index is the average of sectoral scores. The discriminatory nature of measures, i.e. when they apply to foreign investors only, is the central criterion for scoring a measure. State ownership and state monopolies, to the extent they are not discriminatory towards foreigners, are not scored. The FDI Index is not a full measure of a country’s investment climate. A range of other factors come into play, including how FDI rules are implemented. Entry barriers can also arise for other reasons, including state ownership in key sectors. A country’s ability to attract FDI will be affected by others factors such as the size of its market, the extent of its integration with neighbours and even geography among other. Nonetheless, FDI rules can be a critical determinant of a country’s attractiveness to foreign investors.

The OECD Green Growth database contains selected indicators for monitoring progress towards green growth to support policy making and inform the public at large. The database synthesises data and indicators across a wide range of domains including a range of OECD databases as well as external data sources. The database covers OECD member and accession countries, key partners (including Brazil, China, India, Indonesia and South Africa) and other selected non-OECD countries.

This indicator reports the percentage of students of each country of origin over the total of international students.

Metadata by country are available in English and French. Please click on the link below: https://www.oecd.org/sdd/its/OECD-Trade-In-Services-EBOPS2010-metadata-all-countries.pdf. The aim of this dataflow International Trade in Services EBOPS 2010 (by partner country) is to collect and disseminate balance of payments data on international trade in services at the most detailed partner country level available. To the extent that countries report them, data are also broken down by type of service according to the EBOPS 2010 classification. There has been a growing interest in monitoring patterns of trade in services around the world, which is partly associated with ongoing trade negotiations and partly due to the increasing importance of services in OECD economies. It has been developed to supplement other OECD publications on trade in services to address the data needs of trade analysts. It is also an important part of OECD's programme to facilitate the implementation of the recommendations of the revised Manual on Statistics of International Trade in Services 2010. The currency unit used for all series is: Millions of US dollars or Millions of National Currency or Millions of Euros. OECD statistics contact: [email protected] http://www.oecd.org/sdd

The land cover dataset provides a global assessment of land cover and land cover change to monitor pressures on ecosystems and biodiversity. By using geospatial data with high spatio-temporal resolution, it develops a set of internationally comparable indicators with a long time series from 2000 to 2020 with a five-year interval. Please see the working paper for a more complete description of the methods. The dataset has a global coverage on the national level, while on the sub-national TL2 level (i.e. large subnational regions) results are reported for all OECD countries as well as for Argentina, Brazil, China, India, Indonesia and South Africa. The following country aggregates are included: Euro area, European Union, Advanced economies, Emerging market economies, G7, G20, OECD, OECD Europe, OECD Asia Oceania, OECD Americas, the LAC region and the World. Data source(s): Copernicus Climate Change Initiative land cover data and Global Human Settlement Layer built-up area data. Contact: [email protected] Database documentation

Land resources are one of the four components of the natural environment: water, air, land and living resources. In this context land is both: a physical "milieu" necessary for the development of natural vegetation as well as cultivated vegetation;a resource for human activities.  The data presented here give information concerning land use state and changes (e.g. agricultural land, forest land).  Land area excludes area under inland water bodies (i.e. major rivers and lakes).   Arable refers to all land generally under rotation, whether for temporary crops (double-cropped areas are counted only once) or meadows, or left fallow (less than five years). These data are not meant to indicate the amount of land that is potentially cultivable.  Permanent crops are those that occupy land for a long period and do not have to be planted for several years after each harvest (e.g. cocoa, coffee, rubber). Land under vines and trees and shrubs producing fruits, nuts and flowers, such as roses and jasmine, is so classified, as are nurseries (except those for forest trees, which should be classified under "forests and other wooded land").  Arable and permanent crop land is defined as the sum of arable area and land under permanent crops.  Permanent meadows and pastures refer to land used for five years or more to grow herbaceous forage crops, either cultivated or growing wild (wild prairie or grazing land).  Forest refers to land spanning more than 0.5 hectare (0.005 km2) and a canopy cover of more than 10 percent, or trees able to reach these thresholds in situ. This includes land from which forests have been cleared but that will be reforested in the foreseeable future. This excludes woodland or forest predominantly under agricultural or urban land use and used only for recreation purposes.

The Maritime Transport Costs (MTC)database contains data from 1991 to the most recent available year of bilateral maritime transport costs. Transport costs are available for 43 importing countries (including EU15 countries as a custom union) from 218 countries of origin at the detailed commodity (6 digit) level of the Harmonized System 1988. This dataset should only be used in conjunction with the paper Clarifying Trade Costs in Maritime Transport which outlines methodology, data coverage and caveats to its use. Key Statistical Concept Import charges represent the aggregate cost of all freight, insurance and other charges (excluding import duties) incurred in bringing the merchandise from alongside the carrier at the port of export and placing it alongside the carrier at the first port of entry in the importing country. Insurance charges are therefore included in the transport cost variables and are estimated to be approximately 1.5% of the import value of the merchandise.