Organisation for Economic Co-operation and Development

commitment is a firm written obligation by a government or official agency, backed by the appropriation or availability of the necessary funds, to provide resources of a specified amount under specified financial terms and conditions and for specified purposes for the benefit of a recipient country or a multilateral agency. Members unable to comply with this definition should explain the definition that they use. -- Commitments are considered to be made at the date a loan or grant agreement is signed or the obligation is otherwise made known to the recipient (e.g. in the case of budgetary allocations to overseas territories, the final vote of the budget should be taken as the date of commitment). For certain special expenditures, e.g. emergency aid, the date of disbursement may be taken as the date of commitment. -- Bilateral commitments comprise new commitments and additions to earlier commitments, excluding any commitments cancelled during the same year. Cancellations and reductions in the year reported on of commitments made in earlier years are reported in the CRS, but not in the DAC questionnaire. -- In contrast to bilateral commitments, commitments of capital subscriptions, grants and loans to multilateral agencies should show the sum of amounts which are expected to be disbursed before the end of the next year and amounts disbursed in the year reported on but not previously reported as a commitment. For capital subscriptions in the form of notes payable at sight, enter the expected amount of deposits of such notes as the amount committed.

Destination of Official Development Assistance Disbursements. Geographical breakdown by donor, recipient and for some types of aid (e.g. grant, loan, technical co-operation) on a disbursement basis (i.e. actual expenditures). The data cover flows from bilateral and multilateral donors which focus on flows from DAC member countries and the EU Institutions.

Residential Property Prices Indices (RPPIs) – also named House price indices (HPIs), are index numbers that measure the prices of residential properties over time. RPPIs are key statistics not only for citizens and households across the world, but also for economic and monetary policy makers. They can help, for example, to monitor potential macroeconomic imbalances and the risk exposure of the household and financial sectors. This dataset covers the 34 OECD member countries and some non-member countries. In addition to the nominal RPPIs it contains information on real house prices, rental prices and the ratios of nominal prices to rents and to disposable household income per capita. This dataset contains quarterly statistics for each country. House prices differ widely across OECD countries, both with respect to recent changes and to valuation levels. The OECD has identified one main nominal index for each country that covers the prices for the sale of newly-built and existing dwellings. The datasets “Analytical house price indicators” and “Residential Property Price Indices (RPPIs) – Headline Indicators” refer to the same price indices for all countries apart from Brazil, Canada, China, the United States and the Euro area. These differences are further documented in country-specific metadata. For the United States, the series used in “Analytical house price indicators” is included in the dataset called “Residential Property Price Indices (RPPIs) – Complete database”, but is not the headline indicator. For all other countries, non-seasonally adjusted price indices in both datasets are identical in the period in which they overlap. This research dataset provides extended time series coverage for many countries. The objective is to provide information on the long term trend of house prices and develop indicators which can be used to help track and analyse macroeconomic developments and risks. The extended data supplement the OECD RPPI data with historical data from a variety of sources, including other international organisations, central banks and national statistical offices. The methodological basis on the historical data and the types of geographical areas and dwellings they cover can differ from those used in the OECD RPPI data. The database contains a number of additional series. Real house prices are given by the ratio of seasonally adjusted nominal house prices to the seasonally adjusted consumers’ expenditure deflator in each country, from the OECD national accounts database. This provides information on how nominal house prices have changed over time relative to prices in the general economy. The rental prices come from the OECD Main Economic Indicators database and refer to Consumer Price Indices (CPIs) for Actual rentals for housing (COICOP 04.1). If this indicator is missing for a country, another indicator is chosen. The chosen indicator are usually those corresponding to the CPI aggregate for Housing including Actual rentals for housing (COICOP 04.1), imputed rentals for housing (COICOP 04.2) and Maintenance and repair of the dwelling (COICOP 04.3). The disposable income indicators come from the OECD national accounts database. Net household disposable income is used. The population data come from the OECD national accounts database. The price-to-rent ratio is given by the ratio of nominal house prices to rental prices. This is a measure of the profitability of owning a house. The price-to-income ratio is given by the ratio of nominal house prices to nominal household disposable income per capita. This is a measure of the affordability of purchasing a house. An indication that house prices may be overvalued is provided if either of these ratios is above their long-term averages. The standardised price-rent and price-income ratios show the current price-rent and price-income ratios relative to their respective long-term averages. The long-term average, which is used as a reference value, is calculated over the whole period available when the indicator begins after 1980 or 1980 if the indicator is available over a longer time period. The standardised ratio is indexed to a reference value equal to 100 over the full sample period. Values over 100 indicate that the present price-rent ratio, or price-income ratio, is above its long-run norms. This provides an indication of possible housing market pressures.

The OECD's ANalytical Business Enterprise Research and Development (ANBERD) database presents annual data on Research and Development (R&D) expenditures by industry and was developed to provide analysts with comprehensive data on business R&D expenditures. The ANBERD database incorporates a number of estimations that build upon and extend national submissions of business enterprise R&D data by industry (main activity/industry orientation). The current version of the ANBERD database presents OECD countries' and selected non-member economies' business expenditure on R&D since 1987, broken down across 100 manufacturing and service industry groups. The reported data follow the International Standard Industrial Classification, Revision 4 (ISIC Rev. 4) and are expressed in national currencies as well as in US dollars at Purchasing Power Parity (PPP), both at current and constant prices.   Main activity and industry orientation: The 2015 Frascati Manual practice is to report BERD on an enterprise basis. The main economic activity of an enterprise is usually defined as that which accounts for most of its economic outputs; this may be identified directly from sales or indirectly proxied (such as by numbers of personnel devoted to different activities). This determines the industry in which the enterprise, and any BERD it carries out, is classified. As such, all BERD of a diversified enterprise (i.e. one with multiple lines of business) is allocated to the same industry, that of its main activity. This enables, as far as possible, the alignment and compatability of BERD data with other economic statistics (e.g. value added broken down by industry). In addition, the Frascati Manual also recommends reporting BERD by industry orientation, whereby the statistical unit’s R&D is distributed across the various lines of business to which it relates. In a few countries, hybrid approaches are followed and reported as main activity data. As an example, some countries primarily follow the main activity approach but redistribute the R&D of large diversified firms across the economic activities to which it relates. This can affect interpretation of the data and resulting statistics. There are also important differences between countries in the treatment of R&D undertaken by firms in the service sector but closely associated (though not necessarily contractually) with manufacturing firms. Industrial research institutes, largely funded by the manufacturing industries they serve, are the most frequent examples. With the implementation of the 2015 Frascati Manual, such hybrid data will be phased out in favour of a strict main activity approach. Countries still reporting hybrid data are flagged in the ANBERD country notes.

The “ALFS Summary tables” dataset is a subset of the Annual Labour Force Statistics database which presents annual labour force statistics and broad population series for 34 OECD member countries plus Brazil, Columbia and Russian Federation and 4 geographical areas (Major Seven, Euro area, European Union and OECD-Total). Data are presented in thousands of persons, in percentage or as indices with base year 2010=100. This dataset contains estimates from the OECD Secretariat for the latest years when countries did not provide data. These estimates are necessary to compile aggregated statistics for the geographical areas for a complete span of time. Since 2003, employment data by sector for the United States are compiled following the North American Industrial Classification System (NAICS); therefore they are not strictly comparable with other countries’ data. Euro area and European Union data were extracted from Eurostat (LFS Series, Detailed annual survey results in New Cronos). Euro area refer to Euro area with 17 countries (geo = ea17). European Union refers to European Union with 27 countries (geo = eu27).

This dataset present the Balanced Trade in Services (BaTIS) dataset published by OECD. It is a complete, consistent and balanced matrix of international trade in services statistics (ITSS). It contains annual bilateral data covering 202 reporters and partners, broken down by the 12 main EBOPS2010 (BPM6) categories.

The OECD broadband database provides access to a range of broadband-related statistics gathered by the OECD. Policymakers must examine a range of indicators which reflect the status of individual broadband markets in the OECD. Source - https://www.oecd.org/digital/broadband/broadband-statistics/

Statistical population: CLIs are calculated for 33 OECD countries (Iceland is not included), 6 non-member economies and 8 zone aggregates. A country CLI comprises a set of component series selected from a wide range of key short-term economic indicators.   CLIs, reference series data (see below) and standardised business and consumer confidence indicators are presented in various forms.   Recommended uses and limitations: The composite leading indicator is a times series, formed by aggregating a variety of component indicators which show a reasonably consistent relationship with a reference series (e.g. industrial production IIP up to March 2012 and since then the reference series is GDP) at turning points. The OECD CLI is designed to provide qualitative information on short-term economic movements, especially at the turning points, rather than quantitative measures. Therefore, the main message of CLI movements over time is the increase or decrease, rather than the amplitude of the changes. The OECD’s headline indicator is the amplitude adjusted CLI. In practice, turning points in the de-trended reference series have been found about 4 to 8 months (on average) after the signals of turning points had been detected in the headline CLI.

The 'Consumer Price Indices (CPIs)' contains all data that was previously contained in three different datasets: 'Consumer Prices', 'National Consumer Price Indices (CPIs) by COICOP divisions' and 'Harmonised Indices of Consumer Prices (HICPs) by COICOP divisions'. The 'Consumer Price Indices (CPIs)' dataset contains predominantly monthly statistics, and associated statistical methodological information, for the 36 OECD member countries and for some non-member countries. The ‘Consumer Price Indices (CPIs)' dataset contains statistics on Consumer Price Indices including national CPIs, Harmonised Indices of Consumer Prices (HICPs) and their associated weights and contributions to national annual inflation. The data series presented have been chosen as the most relevant prices statistics for which comparable data across countries is available. In all cases, a lot of effort has been made to ensure that the data are internationally comparable across all countries presented and that all the subjects have good historical time-series’ data to aid with analysis. Data are available monthly for all the countries except for Australia and New Zealand (quarterly data).

The country statistical profiles provide a broad selection of indicators, illustrating the demographic, economic, environmental and social developments, for all OECD members. The dataset also covers the five key partner economies with which the OECD has developed an enhanced engagement program with (Brazil, China, India, Indonesia and South Africa) ,accession countries (Colombia, Costa Rica and Lithuania) , Peru and the Russian Federation. The user can easily compare indicators across all countries. Total fertility rates - Unit of measure used: Number of children born to women aged 15 to 49

The objective of the CRS Aid Activity database is to provide a set of readily available basic data that enables analysis on where aid goes, what purposes it serves and what policies it aims to implement, on a comparable basis for all DAC members. Data are collected on individual projects and programmes. Focus is on financial data but some descriptive information is also made available.

There has been a growing interest in monitoring patterns of trade in services around the world, which is partly associated with ongoing trade negotiations and partly due to the increasing importance of services in OECD economies. It has been developed to supplement other OECD publications on trade in services to address the data needs of trade analysts. It is also an important part of OECD's programme to facilitate the implementation of the recommendations of the revised Manual on Statistics of International Trade in Services 2010.Other commentsThe Task Force on Statistics of International Trade in Services maintains a matrix summarising the status of the trade in services data collection performed by International Organisations. The table displays links to the databases as well as update timetables, availability of metadata, availability of bilateral data, and other important characteristics.

The OECD Economic Outlook analyzes the major economic trends over the coming 2 years. It provides in-depth coverage of the main economic issues and the policy measures required to foster growth in each member country. Forthcoming developments in major non-OECD economies are also evaluated in detail. Each edition of the Outlook provides a unique resource to keep abreast of world economic developments. The OECD Economic Outlook database is a comprehensive and consistent macroeconomic database of the OECD economies, covering expenditures, foreign trade, output, labor markets, interest and exchange rates, balance of payments and government debt. For the non-OECD regions, foreign trade and current account series are available. Variables are defined in such a way that they are as homogenous as possible for the countries covered. Breaks in underlying series are corrected as far as possible. Sources for the historical data are publications of national statistical agencies and OECD data bases such as Quarterly National Accounts, Annual National Accounts, Labor Force Statistics and Main Economic Indicators. The cut-off date for information used in the compilation of the projections was June 1, 2023. The aggregation of world trade takes into account the projections made for the main non-OECD economies. Thus, besides OECD and the OECD euro area, the following regions are available: Dynamic Asian Economies (Chinese Taipei, Hong Kong, Malaysia, the Philippines, Singapore, Thailand, Vietnam); Oil Producers (Algeria, Angola, Azerbaijan Bahrain, Brunei, Chad, Rep. of Congo, Ecuador, Equatorial Guinea, Gabon, Iran, Iraq, Kazakhstan, Kuwait, Libya, Nigeria, Oman, Qatar, Saudi Arabia, Sudan, Timor-Leste , Trinidad and Tobago, Turkmenistan, United Arab Emirates, Yemen, Venezuela); with the remaining countries in a residual 'Rest of the World' group.

The OECD, in cooperation with the EU, has developed a harmonised definition of urban areas which overcomes previous limitations linked to administrative definitions (OECD, 2012). According to this definition an urban area is a functional economic unit characterised by densely inhabited “city core” and “commuting zone” whose labour market is highly integrated with the core. The Metropolitan database provides indicators of 649 OECD metropolitan areas identified in 33 OECD countries and the functional urban areas of Colombia. Comparable values of population, GDP, employment, and other indicators are presented.

This indicator presents internationally comparable data regarding the labour force status and the educational attainment level by the National Educational Attainment Categories (NEAC) as reported by the labour force survey (LFS) and published in OECD Education at a Glance 2017. For trend data, the Education at a Glance Database includes data from 1981 to 2016 (or years with available data).

The nature of expenditure distinguishes between current and capital expenditure. The resource category refers to service provider (public institutions, government-dependent private institutions, and independent private institutions, i.e. both educational and other institutions). These expenditure figures are intended to represent the total cost of services provided by each type of institution, without regard to sources of funds (whether they are public or private).

All entities that provide funds for education, either initially or as final payers, are classified as either governmental (public) sources or non-governmental (private) sources, the sole exception being "international agencies and other foreign sources", which are treated as a separate category. There are three types of financial transactions: Direct expenditure on educational institutions; Transfers to students or households and to other private entities; and Households' expenditure on education outside educational institutions.

These indicators on expenditure on education are published in chapter C of Education at a Glance, which covers financial and human resources invested in education.They are either policy levers or provide context information on education systems, or sometimes both. For example, expenditure per student is a key policy measure that most directly affects the individual learner, as it acts as a constraint on the learning environment in schools and learning conditions in the classroom.The data set “educational finance indicators” provides the main indicators computed for three levels of education : primary, secondary and post-secondary non-tertiary levels combined; tertiary level; and primary to tertiary levels combined. Other datasets provide more breakdowns for each specific indicator.

Average number of teachers by sex and age.

Average number of teachers by sex and type of institution.

Employment, participation rates: population aged 15-64; Unemployment rate: active population aged 15-64.   Rates as defined by the International Labour Organization.

In view of the strong demand for cross-national indicators on the situation of families and children, the OECD Family Database was developed to provide cross-national indicators on family outcomes and family policies across the OECD countries, its enhanced engagement partners and EU member states. The database brings together information from various national and international databases, both from within the OECD and from external organisations. The database classifies indicators into four main dimensions: (i) structure of families, (ii) labour market position of families, (iii) public policies for families and children and (iv) child outcomes. Detailed information on the definitions, sources and methods used in the construction of the database can be found on the OECD Family Database webpage.

FDI data are based on statistics provided by 35 OECD member countries and by Lithuania. BMD4: OECD Benchmark Definition of Foreign Direct Investment - 4th Edition

FDI statistics cover all entities in an FDI relationship. An FDI relationship is established when an investor in one country acquires 10% or more of the voting power in a business enterprise in another country. The investor is also called a direct investor or a parent and the business enterprise is called a direct investment enterprise or an affiliate. The 10 percent criteria is used to establish that the direct investor has a significant degree of influence over the operations of the direct investment enterprise. The FDI population includes affiliates that are directly and indirectly owned by the parent. In direct ownership, the parent owns the 10% or more voting power itself. In indirect ownership, the parent controls an affiliate that in turn owns 10 percent or more of the voting power in another enterprise. The FDI population also includes enterprises that are not in a direct investment relationship themselves but have a direct investor in common. Called fellow enterprises, they are included because, even though there is no direct investment relationship between the two, any transactions between them likely resulted from the influence that their common direct investor has on both of their operations.

This dataset FDI positions main aggregates, BMD4 is updated every quarter and includes annual aggregate Foreign Direct Investment (FDI) positions for OECD member countries and for non-OECD G20 countries (Argentina, Brazil, China, India, Indonesia, Saudi Arabia and South Africa), which are included in International Investment Position (IIP) accounts. FDI positions record the total level of direct investment at a given point in time, usually the end of a quarter or of a year.

The FDI Regulatory Restrictiveness Index (FDI Index) measures statutory restrictions on foreign direct investment across 22 economic sectors. It gauges the restrictiveness of a country’s FDI rules by looking at the four main types of restrictions on FDI: 1) Foreign equity limitations; 2) Discriminatory screening or approval mechanisms; 3) Restrictions on the employment of foreigners as key personnel and 4) Other operational restrictions, e.g. restrictions on branching and on capital repatriation or on land ownership by foreign-owend enterprises. Restrictions are evaluated on a 0 (open) to 1 (closed) scale. The overall restrictiveness index is the average of sectoral scores. The discriminatory nature of measures, i.e. when they apply to foreign investors only, is the central criterion for scoring a measure. State ownership and state monopolies, to the extent they are not discriminatory towards foreigners, are not scored. The FDI Index is not a full measure of a country’s investment climate. A range of other factors come into play, including how FDI rules are implemented. Entry barriers can also arise for other reasons, including state ownership in key sectors. A country’s ability to attract FDI will be affected by others factors such as the size of its market, the extent of its integration with neighbours and even geography among other. Nonetheless, FDI rules can be a critical determinant of a country’s attractiveness to foreign investors.

FDI statistics cover all entities in an FDI relationship. An FDI relationship is established when an investor in one country acquires 10% or more of the voting power in a business enterprise in another country. The investor is also called a direct investor or a parent and the business enterprise is called a direct investment enterprise or an affiliate. The 10 percent criteria is used to establish that the direct investor has a significant degree of influence over the operations of the direct investment enterprise.   The FDI population includes affiliates that are directly and indirectly owned by the parent. In direct ownership, the parent owns the 10% or more voting power itself. In indirect ownership, the parent controls an affiliate that in turn owns 10 percent or more of the voting power in another enterprise.   The FDI population also includes enterprises that are not in a direct investment relationship themselves but have a direct investor in common. Called fellow enterprises, they are included because, even though there is no direct investment relationship between the two, any transactions between them likely resulted from the influence that their common direct investor has on both of their operations.

Date is taken as per country metadata, and which is not having any metadata date is considered as 2023

Number of people who graduated from an education programme by field and sex.

The OECD Green Growth database contains selected indicators for monitoring progress towards green growth to support policy making and inform the public at large. The database synthesises data and indicators across a wide range of domains including a range of OECD databases as well as external data sources. The database covers OECD member and accession countries, key partners (including Brazil, China, India, Indonesia and South Africa) and other selected non-OECD countries.

This dataset presents trends in man-made emissions of major greenhouse gases and emissions by gas.   Data refer to total emissions of CO2 (emissions from energy use and industrial processes, e.g. cement production), CH4 (methane emissions from solid waste, livestock, mining of hard coal and lignite, rice paddies, agriculture and leaks from natural gas pipelines), nitrous oxide (N2O), hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), sulphur hexafluoride (SF6) and nitrogen trifluoride (NF3). Data exclude indirect CO2.   Intensities (per unit of GDP and per capita) as well as index are calculated on gross direct emissions excluding emissions or removals from land-use, land-use change and forestry (LULUCF).   The GDP used to calculate intensities is expressed in USD at 2010 prices and PPPs.

Cancer follow up has been given for the range of 5 years. The highest range has been considered as for this period, for example 1995-2000 is considered as 2000.

OECD Health Data 2016 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.

OECD Health Data 2017 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.B1:B4

OECD Health Data 2017 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.

A System of Health Accounts 2011 provides an updated and systematic description of the financial flows related to the consumption of health care goods and services. As demands for information increase and more countries implement and institutionalise health accounts according to the system, the data produced are expected to be more comparable, more detailed and more policy relevant. It builds on the original OECD Manual, published in 2000 to create a single global framework for producing health expenditure accounts that can help track resource flows from sources to uses. It is the result of a collaborative effort between the OECD, WHO and the European Commission, and sets out in more detail the boundaries, the definitions and the concepts – responding to health care systems around the globe – from the simplest to the more complicated. The accounting framework is organised around a tri-axial system for the recording of health care expenditure, namely classifications of the functions of health care (ICHA-HC), health care provision (ICHA-HP), and financing schemes (ICHA-HF).

OECD Health Data 2016 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.

How’s Life? Well-being is the one-stop shop for the 80+ indicators of the OECD Well-being Dashboard, providing information on current well-being outcomes, well-being inequalities and the resources and risks that underpin future well-being. The 11 dimensions of current well-being relate to material conditions that shape people’s economic options (Income and Wealth, Housing, Work and Job Quality) and quality-of-life factors that encompass how well people are (and how well they feel they are), what they know and can do, and how healthy and safe their places of living are (Health, Knowledge and Skills, Environmental Quality, Subjective Well-being, Safety). Quality of life also encompasses how connected and engaged people are, and how and with whom they spend their time (Work-Life Balance, Social Connections, Civic Engagement). The distribution of current well-being is taken into account by looking at three types of inequality: gaps between population groups (horizontal inequalities); gaps between those at the top and those at the bottom of the achievement scale in each dimension (vertical inequalities); and deprivations (i.e. the share of the population falling below a given threshold of achievement). The systemic resources that underpin future well-being over time are expressed in terms of four types of capital: Economic, Natural, Human and Social.

This dataset presents number of importing/exporting enterprises and their trade value (in millions of USD) by size class, and economic activity expressed in ISIC Rev.4.

http://www.oecd.org/els/soc/IDD-Metadata.pdf

Geographic coverage OECD countries, Selected African and Asian countries, Selected Latin American countries Institutional coverage The insurance industry is a key component of the economy by virtue of the amount of premiums it collects, the scale of its investment and, more fundamentally, the essential social and economic role it plays in covering personal and business risks. The "OECD Insurance Statistics" publication provides major official insurance statistics for all OECD countries. The reader will find information on the diverse activities of this industry and on international insurance market trends. The data, which are standardised as far as possible, are broken down under numerous sub-headings, and a series of indicators makes the characteristics of the national markets more readily comprehensible. This publication is an essential tool for civil servants, businessmen and academics working in the insurance field. Item coverage This part consists of tables by indicators, which reflect the most significant characteristics of the OECD insurance market. In most cases, the tables contain data of all OECD countries as well as aggregated "OECD", "EU15" (the 15 member countries of the European Union in 1995) and "NAFTA" data from 1983 to 2015, for the following categories: - life insurance, - non-life insurance - and total. The premiums amounts are converted from national currencies into US dollar. Exchange rates used are end-of-period exchanges rates for all variables valued at the end of the year, and period-average for variables representig a flow during the year.

Unit of measure used: Thousands   OECD countries seldom have tools specifically designed to measure the inflows and outflows of the foreign population, and national estimates are generally based either on population registers or residence permit data. This note is aimed at describing more systematically what is measured by each of the sources used.   Flows derived from population registers   Population registers can usually produce inflow and outflow data for both nationals and foreigners. To register, foreigners may have to indicate possession of an appropriate residence and/or work permit valid for at least as long as the minimum registration period. Emigrants are usually identified by a stated intention to leave the country, although the period of (intended) absence is not always specified.   When population registers are used, departures tend to be less well recorded than arrivals. Indeed, the emigrant who plans to return to the host country in the future may be reluctant to inform about his departure to avoid losing rights related to the presence on the register. Registration criteria vary considerably across countries (as the minimum duration of stay for individuals to be defined as immigrants ranges from three months to one year), which poses major problems of international comparison. For example, in some countries, register data cover a portion of temporary migrants, in some cases including asylum seekers when they live in private households (as opposed to reception centres or hostels for immigrants) and international students.   Flows derived from residence and/or work permits   Statistics on permits are generally based on the number of permits issued during a given period and depend on the types of permits used. The so-called “settlement countries” (Australia, Canada, New Zealand and the United States) consider as immigrants persons who have been granted the right of permanent residence. Statistics on temporary immigrants are also published in this database for these countries since the legal duration of their residence is often similar to long-term migration (over a year). In the case of France, the permits covered are those valid for at least one year (excluding students). Data for Italy and Portugal include temporary migrants.   Another characteristic of permit data is that flows of nationals are not recorded. Some flows of foreigners may also not be recorded, either because the type of permit they hold is not tabulated in the statistics or because they are not required to have a permit (freedom of movement agreements). In addition, permit data do not necessarily reflect physical flows or actual lengths of stay since: i) permits may be issued overseas but individuals may decide not to use them, or delay their arrival; ii) permits may be issued to persons who have in fact been resident in the country for some time, the permit indicating a change of status, or a renewal of the same permit.   Permit data may be influenced by the processing capacity of government agencies. In some instances a large backlog of applications may build up and therefore the true demand for permits may only emerge once backlogs are cleared.   Flows estimated from specific surveys   Ireland provides estimates based on the results of Quarterly National Household Surveys and other sources such as permit data and asylum applications. These estimates are revised periodically on the basis of census data. Data for the United Kingdom are based on a survey of passengers entering or exiting the country by plane, train or boat (International Passenger Survey). One of the aims of this survey is to estimate the number and characteristics of migrants. The survey is based on a random sample of approximately one out of every 500 passengers. The figures were revised significantly following the latest census in each of these two countries, which seems to indicate that these estimates do not constitute an “ideal” source either. Australia and New Zealand also conduct passenger surveys which enable them to establish the length of stay on the basis of migrants’ stated intentions when they enter or exit the country.

The OECD Long-Term Baseline is a projection of some major economic variables beyond the short-term horizon of the OECD Economic Outlook. It covers all OECD economies, non-OECD G20 economies and selected key partners. The projection horizon is currently 2060. For the historical period and the short-run projection horizon, the series are consistent with those of the OECD Economic Outlook number 114. The definitions, sources and methods are also generally the same. For more details on the methodology, please see boxes and Annex in Guillemette, Y. and J. Château (2023), 'Long-Term Scenarios: Incorporating the Energy Transition', OECD Economic Policy Papers, No. 33, OECD Publishing, Paris, and references therein. The baseline scenario is a projection conditional on a number of assumptions, notably that countries do not carry out institutional and policy reforms (see section 2 of the reference cited above). It is used as a reference point to illustrate the potential impact of structural reforms in alternative scenarios. The energy transition scenario is an alternative scenario with accelerated energy transition broadly consistent with net zero GHG emissions by 2050 (see section 3 of the reference cited above).

Main Economic Indicators (MEI) provides a wide range of indicators on recent economic developments in the 35 OECD member countries and 15 non-member countries. The indicators published in MEI have been prepared by national statistical agencies primarily to meet the requirements of users within their own country. In most instances, the indicators are compiled in accordance with international statistical guidelines and recommendations. However, national practices may depart from these guidelines, and these departures may impact on comparability between countries.

This biannual publication provides a set of indicators that reflect the level and structure of the efforts undertaken by OECD member countries and seven non-member economies (Argentina, People's Republic of China, Romania, Russian Federation, Singapore, South Africa, Chinese Taipei) in the field of science and technology. These data include final or provisional results as well as forecasts established by government authorities. The indicators cover the resources devoted to research and development, patent families, technology balance of payments and international trade in R&D-intensive industries. Also presented are the underlying economic series used to calculate these indicators. Indicators on R&D expenditures, budgets and personnel are derived from the OECD's Research and Development Statistics (RDS) database, which is based on the data reported to OECD and Eurostat in the framework of a co-ordinated collection. The sources for the other indicators include the OECD databases on Activities of Multinational Enterprises (AMNE), on Bilateral Trade in Goods by Industry and End-use Category database (BTDIxE), on Patents and on Technological Balance of Payments (TBP). The R&D data used in this publication have been collected and presented in line with the standard OECD methodology for R&D statistics as laid out in the OECD "Frascati Manual". The 2002 edition of the manual has now been superseded by the 2015 edition. The revised guidelines and definitions are in the course of being implemented and are not expected to change the main indicators significantly although some terminology changes will occur. This edition of MSTI has been compiled in accordance with the 2002 Frascati Manual; these changes will be made in a coming edition as R&D surveys move to the new standard.   2018 values are estimated value.

The Maritime Transport Costs (MTC)database contains data from 1991 to the most recent available year of bilateral maritime transport costs. Transport costs are available for 43 importing countries (including EU15 countries as a custom union) from 218 countries of origin at the detailed commodity (6 digit) level of the Harmonized System 1988. This dataset should only be used in conjunction with the paper Clarifying Trade Costs in Maritime Transport which outlines methodology, data coverage and caveats to its use. Key Statistical Concept Import charges represent the aggregate cost of all freight, insurance and other charges (excluding import duties) incurred in bringing the merchandise from alongside the carrier at the port of export and placing it alongside the carrier at the first port of entry in the importing country. Insurance charges are therefore included in the transport cost variables and are estimated to be approximately 1.5% of the import value of the merchandise.

This dataset contains monthly Comparative Price Levels (CPL) for OECD countries. CPLs are defined as the ratios of PPPs for private final consumption expenditure to exchange rates. They provide measures of differences in price levels between countries. The monthly PPPs used to derive the table are OECD estimates. The table is to be read vertically. Each column shows the number of specified monetary units needed in each of the countries listed to buy the same representative basket of consumer goods and services. In each case the representative basket costs a hundred units in the country whose currency is specified. Let’s take an example. If you are a Canadian citizen and you want to know the price level in Canada when compared to other countries, you have to look at the column Canada, where the price level is set at 100 for the whole column. If you have 120 for Finland, it means that the price level in Finland is 20% higher than in Canada. It means that you would spend 120 dollars in Finland to buy the same basket of goods and services when you spend 100 in Canada.

The Financial Statistics dataset contains predominantly monthly statistics, and associated statistical methodological information, for the 36 OECD member countries and some selected other countries. The dataset itself contains financial statistics on 4 separate subjects: Monetary Aggregates, Interest Rates, Exchange Rates, and Share Prices. The data series presented within these subjects have been chosen as the most relevant financial statistics for which comparable data across countries is available. In all cases a lot of effort has been made to ensure that the data are internationally comparable across all countries presented and that all the subjects have good historical time-series’ data to aid with analysis. All data are available monthly, and are presented as either an index (where the year 2015 is the base year) or as a level depending on which measure is seen as the most appropriate and/or useful in the economic analysis context.

This dataset presents trends in amounts of municipal waste generated (including household waste), and the treatment and disposal method used. The amount of waste generated in each country is related to the rate of urbanisation, the types and pattern of consumption, household revenue and lifestyles.

It presents gross capital formation, gross fixed capital formation, changes in inventories and acquisition less disposals of valuables broken down by detailed industries according to the classification ISIC rev.4. Gross fixed capital formation is also available broken down by type of assets. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2005). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

It presents fixed assets by activity according to the classification ISIC rev.3 and by type of product and by type of assets.  It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. In national currency, in current prices and constant prices (national base year and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

It presents the balance sheets for non financial assets by institutional sectors, for both produced assets (fixed assets, inventories, valuables) and non-produced assets (tangible and intangible).  It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

This dataset presents information using an "indicator" approach, focusing on cross-country comparisons. The aim is to make the accounts more accessible and informative, whilst taking the opportunity to present the conceptual underpinning  and comparability issues of each of the indicators presented. The range of indicators is set deliberately wide to reflect the richness of the national accounts dataset and to encourage users of economic statistics to refocus some of the spotlight that is often placed on GDP to other important economic indicators, which may better respond to their needs. Indeed many users themselves have been instrumental in this regard. The report of the Commission on the Measurement of Economic Performance and Social Progress (Stiglitz-Sen-Fitoussi Commission) is but one notable example. That is not to undermine the importance of GDP, which arguably remains the most important measure of total economic activity, but other measures may better reflect other aspects of the economy. For example, net national income may be a more appropriate measure of income available to citizens in countries with large outflows of property income, and household adjusted disposable income per capita may be a better indicator of the material well-being of citizens. But certainly from a data perspective more can and remains to be done. The Stiglitz-Sen-Fitoussi Commission for example highlights the pressing need for the provision, by official statistics institutes, of more detailed information that better describes the distributional aspects of activity, especially income, and the need to build on the national accounts framework to address issues such as non-market services produced by households or leisure. It is hoped that by producing a publication such as this and thereby raising awareness, the momentum from this and other initiatives will be accelerated. The publication itself will pick up new indicators in the future as they become available at the OECD.

It presents the whole set of non financial accounts, from the production account to the acquisitions of non-financial assets accounts. For general government sector, property income, other current transfers and capital transfers are consolidated..

It presents the whole set of non financial accounts, from the production account to the acquisitions of non-financial assets accounts. For general government sector, property income, other current transfers and capital transfers are consolidated.. It has been prepared from statistics reported to the OECD by Member countries in their answers to the new version of the annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA.

It presents gross capital formation, gross fixed capital formation, changes in inventories and acquisition less disposals of valuables broken down by detailed industries. Gross fixed capital formation is also available broken down by type of assets. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

It presents the different transactions and balances to get from the GDP to the net lending/net borrowing. Therefore, it includes, in particular, national disposable income (gross and net), consumption of fixed capital as well as net saving.

It presents the final consumption expenditure of households broken down by the COICOP (Classification of Individual Consumption According to Purpose) classification and by durability.  It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

National Accounts - Volume IIIa - Financial Accounts - Flows, which record, by type of financial instruments, the financial transactions between institutional sectors, and are presented in two tables: Financial accounts, consolidated and Financial accounts, non-consolidated.

It provides a faithful image, to the greatest extent possible, of the aggregates and balances of the general government sector in the SNA 1993 conceptual framework. In addition, it brings to light two relevant aggregates that do not belong to this conceptual frame work: the Total Revenue and the Total Expenditure of the general government sector. Unit of measure used - National currency; current prices. Expressed in millions.

Annual National Accounts>General Government Accounts>750. General Government Debt-Maastricht   Unit of measure used: National currency; current prices. Expressed in millions   Statistical population: Government debt as defined in the Maastricht Treaty (Source : Eurostat). Available for Europeans countries only. In the Protocol on the excessive deficit procedure annexed to the Maastricht Treaty, government debt is defined as the debt of the whole general government sector: gross, consolidated and nominal value (face value). It excludes the other accounts payable (AF.7), as well as, if they exist, insurance technical reserve (AF.6).

It provides a breakdown of government expenditure according to their function. To meet this end, economic flows of expenditure must be aggregated according to the Classification of the Functions of Government (COFOG).

It presents the three approaches of the GDP: expenditure based, output based and income based. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA.

Annual National Accounts>Detailed Tables and Simplified Accounts>7A. Labour input by activity, ISIC rev4   Unit of measure used: In persons, full-time equivalents, jobs and hours.   Statistical population: It presents employment, broken down by detailed industries according to the classification ISIC rev.4. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire.

It presents population data and employment by main activity. It includes national concept data for economically active population, unemployed persons, total employment, employees and self-employed, as well as domestic concept data for total employment, employees and self-employed. The domestic concept data are available broken down by main activity. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire.

It presents simplified non-financial accounts, from the gross value added to the net lending/net borrowing. In this table, the total economy is broken down in three main institutional sectors: corporations, general government, households and non-profit institutions serving households. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency, in current prices. Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

It provides a faithful image, to the greatest extent possible, of the aggregates and balances of the general government sector Data are also available, for most countries, for the sub-sectors of general government.

Annual National Accounts>Supply and Use Tables>40. Use at purchasers' prices   Unit of measure used: In national currency, in current prices and previous year prices. Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.   Statistical population: It presents the Use table at purchaser's prices. It provides information by industry (at the 2 digit ISIC Rev 4 level, containing 89 industries) with corresponding breakdowns by product (using the comparable CPA product breakdown). It has been prepared from statistics reported to the OECD by countries in their answers to Supply and Use questionnaire.

Statistical population: Its presents output, intermediate consumption and the gross value added and its components, in particular compensation of employees and gross operating surplus and mixed income, broken down by detailed industries according to the classification ISIC rev.4. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. Unit of measure used: In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.   Note: 6A. Value added and its components by activity, ISIC rev4

Statistical population: Its presents output, intermediate consumption and the gross value added and its components, in particular compensation of employees and gross operating surplus and mixed income, broken down by detailed industries. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. Data presented in this table will not be updated after summer 2010. Data reported to the OECD by countries in their answers to the annual national accounts questionnaire are now available on theme Industry and Services, Structural Analysis (STAN) Databases. Unit of measure used: In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

Net Replacement Rates in unemployment measure the proportion of income that is maintained after 1, 2, …, T months of unemployment.

Non-medical determinants of health: Unhealthy lifestyles and poor environments cause millions of people to die prematurely. Smoking, harmful alcohol use, physical inactivity and obesity are the root cause of many chronic conditions. This dataset presents the latest data for tobacco consumption (including daily smokers by age and sex), vaping (by age and sex), alcohol consumption, fruits and vegetables consumption, as well as measured and self-reported data on overweight and obesity.

The OECD Digital Economy Outlook 2020 examines trends and analyses emerging opportunities and challenges in the digital economy. It highlights how OECD countries and partner economies are taking advantage of information and communication technologies (ICTs) and the Internet to meet their public policy objectives. Through comparative evidence, it informs policy makers of regulatory practices and policy options to help maximise the potential of the digital economy as a driver for innovation and inclusive growth.   This third edition of the OECD Digital Economy Outlook provides a holistic overview of converging trends, policy developments and data on both the supply and demand sides of the digital economy. It illustrates how the digital transformation is affecting economies and societies. Finally, it provides a special focus on how the COVID-19 pandemic is amplifying opportunities and challenges from the digital transformation.

The OECD Science, Technology and Industry Outlook reviews key trends in STI policies and performance in OECD countries and major emerging economies. It is published every two years and draws on a unique international policy survey conducted by the OECD - with more than 45 countries involved in 2014 - and the latest OECD work on STI policy analysis and measurement. Following an overview of the recent STI global landscape, key current policy issues are discussed across a series of thematic policy profiles. Country profiles report the STI performance of individual countries and the most recent national policy developments.

The OECD Weekly Tracker of GDP growth provides a real-time high-frequency indicator of economic activity using machine learning and Google Trends data. It has a wide country coverage of OECD and G20 countries. The Tracker is thus particularly well suited to assessing activity during the turbulent period of the current global pandemic. It applies a machine learning model to a panel of Google Trends data for 46 countries, and aggregates together information about search behaviour related to consumption, labour markets, housing, trade, industrial activity and economic uncertainty.   The Weekly Tracker proxies the percent change in weekly GDP levels from the pre-crisis trend. The pre-crisis trend is taken from OECD forecasts made prior to the crisis (in the November 2019 Economic Outlook). Two other flavours of the Tracker are also available in the datafiles: a Tracker of weekly GDP growth year-on-year (that is, the percent change in weekly GDP from the same week in the past year), and a Tracker of weekly GDP growth year-on-two-year (the percent change in weekly GDP from the same week two years earlier). 

The OECD Pensions at a Glance Database has been developed in order to serve a growing need for pensions indicators. It includes reliable and internationally comparable statistics on public and mandatory and voluntary pensions. It covers 34 OECD countries and aims to cover all G20 countries. Pensions at a Glance reviews and analyses the pension measures enacted or legislated in OECD countries. It provides an in-depth review of the first layer of protection of the elderly, first-tier pensions across countries and provideds a comprehensive selection of pension policy indicators for all OECD and G20 countries.

Private transactions are those undertaken by firms and individuals resident in the reporting country.

The Public Sector Debt database includes quarterly detailed information on all liabilities which constitute debt instruments, by initial and residual maturity, which are held by the government, and more broadly the public sector. The debt instruments are those instruments that require the payment of principal and interest or both at some point(s) in the future. All liabilities are considered debt, except liabilities in the form of equity and investment fund shares and, financial derivatives and employee stock options.

The OECD's quarterly national accounts (QNA) dataset presents data collected from all the OECD member countries and some other major economies on the basis of a standardised questionnaire. It contains a wide selection of generally seasonally adjusted quarterly series most widely used for economic analysis from 1960 or whenever available:

This dataset presents reference statistics (GDP, Total Government Expenditure, deflators, etc.) that are used to calculate some of the indicators on educational expenditure included in the indicators dataset.

The Regional database contains annual data from 1995 to the most recent available year (generally 2022 for demographic and labor market data, 2021 for regional accounts, innovation and social statistics). 

The Regional database contains annual data from 1995 to the most recent available year (generally 2018 for demographic and labor market data, 2017 for regional accounts, innovation and social statistics). The data collection is undertaken by the Center for Entrepreneurship, SMEs, Regions and Cities (CFE). Statistics are collected through an annual questionnaire sent to the delegates of the Working Party on Territorial Indicators (WPTI), and via downloads from the web-sites of National Statistical Offices and Eurostat

The Registered Unemployment and Job Vacancies dataset is a subset of the Short-Term Labour Situation database, which contains predominantly monthly statistics, and associated statistical methodological information, for the 34 OECD member countries and for selected other economies. There are basically two sources for unemployment statistics: labour force surveys and administrative data. Surveys are based on standard methodology and procedures used all over the world while administrative data are subject to national legislations which evolve through time. Consequently registered unemployment data are not comparable across countries. The relationship between survey and registered unemployment is not the same for all countries. Number of registered unemployed persons and registered unemployment rates are presented here because they are monthly and quickly available after their reference period. The job vacancies data provides estimates of the number of unfilled job vacancies across national economies. Series give an indication of the labour demand while the unemployment is linked with the labour supply.

The OECD Secretariat collects a wide range of statistics on businesses and business activity. This database features the data collection of the Statistics Directorate relating to a number of key variables, such as value added, operating surplus, employment, and the number of business units, for example, broken down by 4-digit International Standard of Industrial Classification (ISIC Revision 4) industry groups (including the service sector)), referred to as the Structural Statistics on Industry and Services (SSIS) database; and by size class; referred to as the Business Statistics by Size Class (BSC) database.

The Short-Term Labour Market Statistics dataset contains predominantly quarterly labour statistics, and associated statistical methodological information, for the 35 OECD member countries and selected other economies. The Short-Term Labour Market Statistics dataset covers countries that compile labour statistics from sample household surveys on a monthly or quarterly basis. It is widely accepted that household surveys are the best source for labour market key statistics. In such surveys, information is collected from people living in households through a representative sample and the surveys are based on standard methodology and procedures used internationally. The subjects available cover: working age population by age; active and inactive labour force by age; employment by economic activity, by working time and by status; and, unemployment (including monthly harmonised unemployment) by age and by duration. Data is expressed in levels (thousands of persons) or rates (e.g. employment rate) where applicable.   Data are based on Labour Force Surveys and national information in this dataset is directly collected from the following sources:   ABS - Australian Bureau of Statistics (Australia) Statistics Canada (Canada) INE - Instituto Nacional de Estadísticas (Chile) CBS – Central Bureau of Statistics (Israel) Statistics Bureau (Japan) Statistics Korea (Korea) INEGI - Instituto Nacional de Estadísticas y Geografía (Mexico) Statistics New Zealand (New Zealand) BLS - Bureau of Labor Statistics (the United States) Eurostat (Austria, Belgium, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Luxembourg, the Netherlands, Norway, Poland, Portugal, the Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom).

The share of a population covered for a core set of health services offers an initial measure of access to care and financial protection. Most OECD countries have achieved universal or near-universal coverage for a core set of health services, which usually include consultations with doctors, tests and examinations, and hospital care.

The STAN database for industrial analysis provides analysts and researchers with a comprehensive tool for analysing industrial performance at a relatively detailed level of activity across countries. It includes annual measures of output, labour input, investment which allow users to construct a wide range of indicators and to focus on areas such as productivity growth, competitiveness and general structural change.Through the use of a standard industry list, international comparisons can be made. The industry list, compatible with those used in related OECD databases, provides sufficient detail to highlight technology and digital-intensive sectors. STAN is primarily based on Member countries' annual National Accounts by economic activity tables compiled according to the recommendations of System of National Accounts 2008 (SNA 2008). Previous versions of STAN (from 2000) were based on SNA93 statistics. Missing detail is estimated using other sources of data such as national industrial surveys/censuses. Time series are extended back to the 1970's where possible. This is done using vintage SNA93 or STAN estimates. In STAN, many data points are Secretariat's estimates and are flagged to the attention of users; as such, they do not represent official Member countries' submissions. The current version of STAN is based on the International Standard Industrial Classification of all economic activities, Revision 4 (ISIC Rev. 4). Earlier versions of STAN were based on ISIC Rev. 3 and, prior to 2000, ISIC Rev. 2 (the latter covering the manufacturing sector only). STAN is published on a "rolling basis" with new, or updated, country tables being made available as soon as they are ready.

Student-teacher ratio refers to the average number of students per teacher, while average class size is the average number of students in a classroom.

The subnational government finance dataset presents data on the institutional organisation at local and regional levels as well as on public finance. Financial data cover the general government sector and subnational government subsector (state and local government levels) in the 35 OECD member countries and in the EU. Four main dimensions are presented: expenditure (including investment), revenue, budget balance and debt. The dataset is released as a beta version. Data at country level are derived mainly from the OECD National Accounts harmonised according to the new standards of the System of National Accounts (SNA) 2008, implemented by most OECD countries since December 2014. They are complemented by data from Eurostat, IMF (Australia, Chile), and national statistical institutes for some countries or indicators (in particular, territorial organisation). Data were extracted in February 2017 and are from 2015, unless otherwise specified

Note: 2017 figures are Preliminary. Official and Private Flows - Disbursements and Commitments. Aggregate data (no breakdown by recipient) on ODA, OOF, private and NGO data by donor, type of aid and flow. The data cover flows from all bilateral and multilateral donors except for Tables DAC1, DAC4, DAC5 and DAC7b which focus on flows from DAC member countries and the EU Institutions.

Total Official Flows: the sum of Official Development Assistance (ODA) and Other Official Flows (OOF) represents the total (gross or net) disbursements by the official sector at large to the recipient country shown.

Total Receipts, Net: in addition to Official Development Assistance, this heading includes in particular: other official bilateral transactions which are not concessional or which, even though they have concessional elements, are primarily trade facilitating in character (i.e., "Other Official Flows''); changes in bilateral long-term assets of the private non-monetary and monetary sectors, in particular guaranteed export credits, private direct investment, portfolio investment and, to the extent they are not covered in the preceding headings, loans by private banks. Flows from the multilateral sector which are not classified as concessional are also included here.

The Trade in Value Added (TiVA) database consists of a set of measures that aim to provide better insights into global production networks and supply chains than is possible with conventional trade statistics.   The Origin of value added in final demand presented here, is derived from the latest version of OECD’s Inter-Country Input-Output (ICIO) database and provides estimates of final demand in country c for industry i final goods and services, broken down by the value added originating from source industry j in source country s.   In other words, it reveals how the value of final demand goods and services consumed within a country is an accumulation of value generated by many industries in many countries.   For a description of the method used for calculating these estimates using the ICIO   Domestic value added origin is shown where source country s = c and, for convenience, also represented by source country = “DXD: Domestic”.   From this data cube, a range of final demand-based measures can be derived including those in TiVA principal indicators cube such as: • Domestic value added embodied in foreign final demand, FFD_DVA and related partner shares FFD_DVApSH. • Foreign value added embodied in domestic final demand, DFD_FVA and related partner shares DFD_FVApSH.

The Trade-in Value Added (TiVA) database consists of a set of measures that aim to provide better insights into global production networks and supply chains than is possible with conventional trade statistics.   The Origin of value-added in gross imports presented here is derived from the latest version of OECD’s Inter-Country Input-Output (ICIO) database. It provides estimates of gross imports by country c of goods and services from industry in partner country/region p broken down by value-added originating from source country/region s.   In other words, the four dimensions link the imports of country c to the value-added from source country s embodied in the exports of industry in the exporting country p - thus revealing how the value of a country’s gross imports of intermediate and final products from a particular partner is an accumulation of value generated by many countries.   For a description of the method used for calculating these estimates, using the ICIO   From this data cube, a range of gross imports-based measures can be derived including the following found in the main TiVA indicators database: • Total gross imports by industry, IMGR (c, i): set exporting country p = World and source country s = World. • Domestic value-added content of gross imports by partner and industry, IMGR_DVA (c, i, p): set source country s = importing country c. • Share of IMGR_DVA in relation to IMGR: IMGR_DVAsh (c, i, p).   Note that the same value-added originating from source country s can be present in the gross imports of more than one importing country c (as embodied value-added, from upstream production, may cross national borders many times). In general, therefore, these estimates should be viewed from the perspective of an importing country c.

The lack of common definitions and practices to measure transport infrastructure spending hinders comparisons between countries and spending options. Data for road and rail infrastructure are the most comprehensive while data on sea port and airport spending are less detailed in coverage and definition. While our survey covers all sources of financing a number of countries exclude private spending, including Japan and India. Around 65% of countries report data on urban spending while for the remaining countries data on spending in this area are missing. Indicators such as the share of GDP needed for investment in transport infrastructure, depend on a number of factors, such as the quality and age of existing infrastructure, maturity of the transport system, geography of the country and transport-intensity of its productive sector. Caution is therefore required when comparing investment data between countries. However, data for individual countries and country groups are consistent over time and useful for identifying underlying trends and changes in levels of spending, especially for inland transport infrastructure. These issues of definitions and methods are addressed in a companion report Understanding the Value of Transport Infrastructure – Guidelines for macro-level measurement of spending and assets (ITF/OECD2013) that aims to improve the international collection of related statistics.