Organisation for Economic Co-operation and Development

This dataset contains the main results of the 2017 Eurostat-OECD PPP comparison for the 49 countries that participated in the 2017 round of the Eurostat-OECD Purchasing Power Parity (PPP) Programme. Colombia and Costa Rica participated for the first time. Please note that time series for PPPs for GDP, actual individual consumption and household final consumption for these two countries in the National Accounts databases are still based on the 2011 ICP results until April 2020 (release of ICP 2017 results).

The gross nutrient balances (N and P) are calculated as the difference between the total quantity of nutrient inputs entering an agricultural system (mainly fertilisers, livestock manure), and the quantity of nutrient outputs leaving the system (mainly uptake of nutrients by crops and grassland). Gross nutrient balances are expressed in tonnes of nutrient surplus (when positive) or deficit (when negative). This calculation can be used as a proxy to reveal the status of environmental pressures, such as declining soil fertility in the case of a nutrient deficit, or for a nutrient surplus the risk of polluting soil, water and air. The nutrient balance indicator is also expressed in terms of kilogrammes of nutrient surplus per hectare of agricultural land to facilitate the comparison of the relative intensity of nutrients in agricultural systems between countries.

The gross nutrient balances (N and P) are calculated as the difference between the total quantity of nutrient inputs entering an agricultural system (mainly fertilizers, livestock manure), and the quantity of nutrient outputs leaving the system (mainly uptake of nutrients by crops and grassland). Gross nutrient balances are expressed in tonnes of nutrient surplus (when positive) or deficit (when negative). This calculation can be used as a proxy to reveal the status of environmental pressures, such as declining soil fertility in the case of a nutrient deficit, or for a nutrient surplus the risk of polluting soil, water and air. The nutrient balance indicator is also expressed in terms of kilogrammes of nutrient surplus per hectare of agricultural land to facilitate the comparison of the relative intensity of nutrients in agricultural systems between countries.

This dataset is used to report the tying status of bilateral ODA commitments. Members have agreed that administrative costs and technical co-operation expenditure should be disregarded in assessing the percentages of tied, partially untied and untied aid. These items have not been included in the data reported in this data set.

This database includes annual, quarterly and monthly information on carbon dioxide (CO2) emissions related to commercial passenger, freight, and general aviation flights, on both a territory and a residence basis, for 186 countries. These CO2 emissions are estimated by the OECD, based on a consistent methodology across countries. The main source used for the estimation of these CO2 emissions is a database compiled by the International Civil Aviation Organisation (ICAO) with all commercial passenger and freight flights around the world.

AITRAW = All in average income tax rates at average wage OECD Taxing Wages. Taxing Wages provides unique information on income tax paid by workers and social security contributions levied on employees and their employers in OECD countries. In addition, this annual publication specifies family benefits paid as cash transfers. Amounts of taxes and benefits are detailed program by program, for eight household types which differ by income level and household composition. Results reported include the marginal and effective tax burden for one- and two-earner families, and total labour costs of employers.

The OECD’s ANalytical Business Enterprise Research and Development (ANBERD) database presents annual data on Research and Development (R&D) expenditures by industry and was developed to provide analysts with comprehensive data on business R&D expenditures. The ANBERD database incorporates a number of estimations that build upon and extend national submissions of business enterprise R&D data by industry (main activity/industry orientation).

This table presents the balance sheets for non-financial assets for both produced assets (fixed assets such as dwellings as well as inventories and valuables) and non-produced assets (tangibles such as mineral and energy reserves and intangibles). Assets are shown on a net basis, the net value of an asset is calculated as its gross value decreased by the value of consumption of fixed capital (depreciation). These are presented for the whole economy and by institutional sector: Non-financial Corporations, Financial Corporations, General Government, Households and Non-profit institutions serving households (NPISH). These indicators were presented in the previous dissemination system in the SNA_TABLE9B dataset. See ANA Changes for information on changes in methodology: ANA Changes Explore also the GDP and non-financial accounts webpage: GDP and non-financial accounts webpage OECD statistics contact:[email protected]

This table presents employment data by main economic activity based on Revision 4 of the International Standard Industrial Classification of All Economic Activities (ISIC), according to the domestic concept. The domestic concept is defined by the location of the producer unit: employees are residents and non-residents employed by resident producer units; and self-employed people are resident and non-resident self-employed people in resident producer units. The presentation is on a country-by-country basis. Users are recommended to select one country (or area) at a time in the ‘Reference area’ filter. The default view of the table is for persons, but users can select alternative views for jobs and hours using the ‘Unit of measure’ filter. .These indicators were presented in the previous dissemination system in the SNA_TABLE3 dataset. See ANA Changes for information on changes in methodology: ANA Changes Explore also the GDP and non-financial accounts webpage: GDP and non-financial accounts webpage OECD statistics contact: [email protected]

This table presents Gross Domestic Product (GDP) and its components according to the expenditure approach. In the expenditure approach, the main components of GDP are: final consumption expenditure of households and non-profit institutions serving households (NPISH) plus final consumption expenditure of General Government plus gross fixed capital formation (or investment) plus net trade (exports minus imports). Data is presented for each country in national currency as well as in euros for the European Union and the euro area. Data is also presented converted to US dollars using both purchasing power parities and exchange rates. In this table, the presentation of GDP and its components is on a country-by-country basis. Users are recommended to select one country (or area) at a time in the ‘Reference area’ filter. The default view shows all transactions (GDP and components) for the selected area, but it is possible to select specific components and sub-components of GDP using the ‘Transaction’ filter. The sector to which the selected transactions relate will be shown in the 'Institutional sector' filter, and further options (if applicable) will be shown under the ‘Financial instruments and non-financial assets’ filter. It is also possible to select current prices, chain linked volumes etc using the ‘Price base’ filter (the default view is current prices). The table shows OECD countries and selected economies, as well as the OECD total, OECD Europe, European Union and euro area. These can be selected using the ‘Reference area’ filter. We are working on an issue with rows that appear empty but are in fact not applicable. These indicators were presented in the previous dissemination system in the SNA_TABLE1 dataset. See ANA Changes for information on changes in methodology: ANA Changes Explore also the GDP and non-financial accounts webpage: GDP and non-financial accounts webpage OECD statistics contact: [email protected]

This table presents taxes and social contribution receipts for General Government and its sub-sectors: central, local and state (regional) government and social security, as well as for institutions of the European Union. Total tax receipts comprise taxes on production and imports, current taxes on income wealth etc. and capital taxes. Social contribution receipts comprise actual and imputed social contributions. The presentation is on a country-by-country basis. Users are recommended to select one country (or area) at a time in the ‘Reference area’ filter. Data is presented for each country in national currency as well as in euros for the European Union and the euro area. These indicators were presented in the previous dissemination system in the SNA_TABLE10 dataset. See ANA Changes for information on changes in methodology: ANA Changes Explore also the Government Finances and Public Sector Debt webpage: Government Finances and Public Sector Debt webpage OECD statistics contact: [email protected]

This dataset provides the whole set of OECD annual households final consumption expenditure data and is recommended for users who wish to query a large amount of data. It is not designed for visualising results using the Table and Chart buttons. To access the ‘Developer API query builder’, click on the ‘Developer API’ button above. The application programming interface (API), based on the SDMX standard, allows a developer to access the data using simple RESTful URL and HTTP header options for various choices of response formats including JSON. The query filter is generated according to the current data selection. To change the data selection, use the filters on the left.

The “ALFS Summary tables” dataset is a subset of the Annual Labour Force Statistics database which presents annual labour force statistics for OECD member countries, Brazil and 4 geographical areas (Major Seven, Euro zone, European Union and OECD-Total). Data are presented in thousands of persons, in percentage or as indices with base year 2015=100. Annual data in this dataset are typically calculated as averages of infra-annual estimates. This can lead to differences with annual data published by National Statistics Institutes. This dataset contains estimates from the OECD for the latest years when countries did not provide data. These estimates are necessary to compile aggregated statistics for the geographical areas for a complete span of time. Since 2003, employment data by sector for the United States are compiled following the North American Industrial Classification System (NAICS); therefore they are not strictly comparable with other countries’ data.

This table presents the different transactions and balances to get from Gross Domestic Product (GDP) to net lending/net borrowing. It includes national disposable income (gross and net), consumption of fixed capital and net saving. The presentation is on a country-by-country basis. Users are recommended to select one country (or area) at a time in the ‘Reference area’ filter. Data is presented for each country in national currency as well as in euros for the European Union and the euro area, but you can also ask for it to be presented in US dollars converted with Purchasing Power Parities (PPPs) and exchange rates using the ‘Unit of measure’ filter. It is also possible to select chain linked volume and previous year price measures using the ‘Price base’ filter (the default view is current prices ). The indicators were presented in the previous dissemination system in the SNA_TABLE2 dataset. See ANA Changes for information on changes in methodology: ANA Changes Explore also the GDP and non-financial accounts webpage: GDP and non-financial accounts webpage OECD statistics contact: [email protected]

This table shows annual Purchasing Power Parities (PPPs) for Gross Domestic Product (GDP), household final consumption expenditure and actual individual consumption. It also shows exchange rates (annual averages and end of period), sourced from the International Monetary Fund's database on International Financial Statistics. Final consumption expenditure is the expenditure of resident households on consumption goods or services, while individual consumption is the sum of household consumption plus the individual (not collective) consumption of the non-profit institutions serving households (NPISH) and General Government sectors. These indicators were presented in the previous dissemination system in the SNA_TABLE4 dataset. For further information on (PPPs) please check the following link: Purchasing Power Parities and more precisely FAQ 5: Purchasing power parities OECD statistics contact: [email protected]

This dataset provides the whole set of OECD annual simplified non-financial accounts by institutional sector data and is recommended for users who wish to query a large amount of data. It is not designed for visualising results using the Table and Chart buttons. To access the ‘Developer API query builder’, click on the ‘Developer API’ button above. The application programming interface (API), based on the SDMX standard, allows a developer to access the data using simple RESTful URL and HTTP header options for various choices of response formats including JSON. The query filter is generated according to the current data selection. To change the data selection, use the filters on the left. To get started check the API documentation .For any question contact us

Data are collected from Ministries of Transport, national statistical offices and other institutions designated as the official data source. The survey used for this exercise is the "Trends in the Transport Sector". Variables collected include inland transport of goods and passengers, as well as road injury crashes. Additional information is also gathered on containers transported by rail and sea as well as short sea shipping. Data are published annually on 31 October. Data series start in 1970 and continue until the current year-1, or the most recent available data.

Data source used: The aquaculture production data collection is part of the more comprehensive data gathering carried out on an annual basis by the Fisheries Committee (COFI) of the Trade and Agriculture Directorate (TAD) from OECD members and participating non-OECD economies. Data on marine landings, aquaculture production, inland fisheries catch, fleet, employment, total allowable catch (TAC) and fisheries support estimate (FSE) are collected from Fisheries Ministries, National Statistics Offices and other institutions designated as an official data source. The surveys used for this exercise are the OECD Fisheries questionnaires.

The balance of payments is a statistical statement that provides a systematic summary of economic transactions of an economy with the rest of the world, for a specific time period. The transactions are for the most part between residents and non-residents of the economy. A transaction is defined as an economic flow that reflects the creation, transformation, exchange, transfer, or extinction of economic value and involves changes in ownership, of goods or assets, the provision of services, labour or capital. This dataset presents economies compiling balance of payments statistics in accordance with the 6th edition of the Balance of Payments and International Investment Position Manual published by the IMF (BPM6). Transactions include: the goods and services accounts, the primary income account (income account in BPM5), the secondary income account (transfers in BPM5), the capital account, and the financial account. All economies disseminated here produce balance of payments according to BPM6; providing strong cross-country comparability. As such the main purpose of this dataset is to provide relevant, reliable, consistent, comparable and timely aggregate quarterly balance of payments statistics for analytical purposes. Nevertheless there are some deviations from standard definitions that are indicated in notes (see « i » attached to series). In the financial account, for net value, a positive sign indicates a net flow from the domestic economy to the rest of the world (a lending to the rest of the world) and a negative sign, a net flow from the rest of the world to the domestic economy (i.e. a net borrowing from the rest of the world). At the level of the sub items (investment abroad investment in the reporting economy etc.), a positive sign indicates an increase of the sub item under consideration and a negative sign a decrease. These conventions are imposed by the BPM6. The dataflow covers : all OECD member countries, G20 economies and a selection of non-member economies. The currency unit used for all series is: Millions of US dollars or Millions of National Currency. OECD statistics contact: [email protected] http://www.oecd.org/sdd

Since the collection of 2009 data, the scope of the OECD Global Insurance Statistics questionnaire has been expanded. These changes led to the collection of key balance sheet and income statement items for direct insurance and reinsurance sectors, such as: gross claims paid, outstanding claims provision (changes), gross operating expenses, commissions, total assets, gross technical provisions (of which: unit-linked), shareholder equity, net income.

The Benefits and Wages series addresses the complicated interactions of tax and benefit systems for different family types and labour market situations. The series is a valuable tool used to compare the different benefits made available to those without work and those with different levels of in-work income for OECD countries and EU countries. The main social policy areas are as follows: taxes and social security contributions due on earnings and benefits, unemployment benefits, social assistance, family benefits, housing benefits, and in-work benefits. OECD Work Incentive and Income adequacy indicators, country specific files, the tax-benefit models and the tax benefit calculator, including detailed descriptions of all cash benefits available to those in and out of work as well as the taxes they were liable to pay are available on Benefits and Wages: OECD Indicators   Unit of measure used: Estonia: 2011 - EUR; 2010; 2009; 2008; 2007; 2006; 2005 -EEK Slovak Republic: 2010; 2009 - EUR; 2008; 2007; 2006; 2005 -SKK

The OECD broadband portal provides access to a range of broadband-related statistics gathered by the OECD. Policy makers must examine a range of indicators which reflect the status of individual broadband markets. The OECD broadband speed tests by country show the official measurements of actual access network broadband speed. The OECD broadband map shows national broadband statistics in OECD countries. Mobile broadband penetration has risen to 85.4% in the OECD area, meaning more than four wireless subscriptions for every five inhabitants, according to data for June 2015 released by the OECD .

Data are provided in million national currency (for the euro zone, pre-EMU euro or EUR), million current PPP USD and million constant USD (2010 prices and PPPs). Variables collected This table presents research and development (R&D) expenditure statistics performed in the business enterprise sector. Data include total business enterprise intramural expenditure on R&D by size class and source of funds.

Business Tendency Surveys (BTS) – also called business opinion or business climate surveys – are economic surveys used to monitor and forecast business cycles. Covering 4 different economic sectors (manufacturing, construction, retail trade and services), they are designed to collect qualitative information useful in monitoring the current business situation and forecasting short-term developments by directly asking company managers about the pulse of their businesses. They are well known for providing advance warning of turning points in aggregate economic activity as measured by GDP or industrial production. As respondents provide answers on a 3 scale options (up, same, down, or above normal, normal, below normal), data are summarised in net balances corresponsing to the difference in % of positive over negative replies. Because of their collection mode, timeliness and immediate availability, they have proved to be a cost‑effective mean of generating timely information especially during crises. In the late '90, in collaboration with the European Commission, the OECD has developed a system of harmonised business tendency surveys in order to collect and compare data across countries. The EC Directorate General for Economic and Financial Affairs is since then in charge of running the program and collecting data across EU members, while the OECD helped the adoption and implementation of the same harmonised framework in non-EU OECD countries and BRIICS. By construction, BTS questions are formulated in order to exclude seasonal factors. Nevertheless all series are tested for seasonality by both the OECD (using x12) and by the EC for the EU member data (using DAINTIES). This dataset comprises a set of harmonised target indicators available across OECD and BRIICS countries, any departure from target definitions are documented in the metadata.

Institutional coverage As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Business written in the reporting country on a gross and net premium basis. It contains a breakdown between domestic companies, foreign-controlled companies and branches and agencies or foreign companies.

OECD Indicators on Carbon dioxide (CO2) emissions embodied in international trade (TeCO2) are derived by combining the 2021 editions of OECD Inter-Country Input-Output (ICIO) Database and of International Energy Agency (IEA) statistics on CO2 emissions from fuel combustion. In this release of TeCO2, emissions from fuels used for international aviation and maritime transport (i.e. aviation and marine bunkers) are also considered.Production-based CO2 emissions are estimated by allocating the CO2 emissions to the 45 target industries in OECD ICIO and, to household final consumption of fuels, by both residents and non-residents.Demand-based CO2 emissions are calculated by multiplying the intensities of the production-based emissions (c) with the global Leontief inverse (I-A)(-1) and global final demand matrix (Y) from OECD ICIO, taking the column sums of the resulting matrix and adding residential and private road emissions (FNLC), i.e. direct emissions from final demand: colsum [ diag(c) (I-A)(-1) Y ] + FNLC.For more information, see TeCO2 web page: http://oe.cd/io-co2.

CGPITRT: Central government personal income tax rates and threshold   This table reports statutory central government personal income tax rates for wage income plus the taxable income thresholds at which these statutory rates apply. The table also reports basic/standard tax allowances, tax credits and surtax rates. The information is applicable to a single person without dependents. The threshold, tax allowance and tax credit amounts are expressed in national currencies Tapered means that the tax relief basic amount is reduced with increasing income Further explanatory notes may be found in the Explanatory Annex This data represents part of the data presented within the Excel file “Personal income tax rates and thresholds for central governments - Table I.1”. The Data for 1981 to 1999 is not included here within as not all the data for these years is either available, or can be verified. The OECD tax database provides comparative information on a range of tax statistics - tax revenues, personal income taxes, non-tax compulsory payments, corporate and capital income taxes and taxes on consumption - that are levied in the 34 OECD member countries.” Tax policy Analysis homepage OECD Tax Database Taxing Wages Dissemination format(s) This data is also presented through the OECD Tax database webpage. OECD Tax Database

Institutional coverage As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Commissions in the reporting country, containing a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

The composite leading indicator is a times series, formed by aggregating a variety of component indicators which show a reasonably consistent relationship with a reference series (e.g. industrial production IIP up to March 2012 and since then the reference series is GDP) at turning points. The OECD CLI is designed to provide qualitative information on short-term economic movements, especially at the turning points, rather than quantitative measures. Therefore, the main message of CLI movements over time is the increase or decrease, rather than the amplitude of the changes. The OECD’s headline indicator is the amplitude adjusted CLI. In practice, turning points in the de-trended reference series have been found about 4 to 8 months (on average) after the signals of turning points had been detected in the headline CLI. Detailed information on the OECD methodology for CLIs can be found on the OECD website at: OECD CLIs   CLIs are calculated for G20 countries plus Spain and 5 zone aggregates. A country CLI comprises a set of component series selected from a wide range of key short-term economic indicators. CLIs, reference series data (see below) and standardised business and consumer confidence indicators are presented in various forms.   OECD CLI methodology document   OECD statistics contact  

This dataset provides information on the level of public equipment installed by countries to managed and abate water pollution. It shows the percentage of national population connected to "public" sewerage networks and related treatment facilities, and the percentage of national population connected to "public" wastewater treatment plants, and the degree of treatment. Connected here means actually connected to a wastewater plants through a public sewage network. When analysing these data, it should be kept in mind that the optimal connection rate is not necessarily 100%. It may vary among countries and depends on geographical features and on the spatial distribution of habitats. The interpretation of those data should take into account some variations in countries' definitions, as reflected in metadata. Data source(s): Joint OECD/Eurostat questionnaire on Inland Waters. Data for non-OECD countries is sourced from UNSD (https://unstats.un.org/unsd/envstats/country_files)

This dataset presents the Consolidated financial transactions by economic sector (Quarterly table 0610), according to SNA 2008 methodology. It comprises all flows, which record, by type of financial instruments, the financial transactions between institutional sectors.

This dataset contains statistics on Consumer Price Indices by COICOP 1999 divisions, including national CPIs, Harmonised Indices of Consumer Prices (HICPs) and their associated weights and contributions to national year-on-year inflation. For countries for which data are already available according to the COICOP 2018 classification statistics on Consumer Price Indices can be found in dataset Consumer price indices (CPIs, HICPs), COICOP 2018. The data series presented have been chosen as the most relevant prices statistics for which comparable data across countries is available. Data are available monthly for all the countries except for Australia and New Zealand (quarterly data).

Note: CPA data for 2018 and 2019 are projections from the 2016 Survey on Forward Spending Plans. Country Programmable Aid (CPA), outlined in our Development Brief  and also known as “core” aid, is the portion of aid donors programme for individual countries, and over which partner countries could have a significant say. CPA is much closer than ODA to capturing the flows of aid that goes to the partner country, and has been proven in several studies to be a good proxy of aid recorded at country level. CPA was developed in 2007 in close collaboration with DAC members. It is derived on the basis of DAC statistics and was retroactively calculated from 2000 onwards

The country statistical profiles provide a broad selection of indicators, illustrating the demographic, economic, environmental and social developments, for all OECD members. The dataset also covers the five key partner economies with which the OECD has developed an enhanced engagement program with (Brazil, China, India, Indonesia and South Africa) ,accession countries (Colombia, Costa Rica and Lithuania) , Peru and the Russian Federation. The user can easily compare indicators across all countries. Total fertility rates - Unit of measure used: Number of children born to women aged 15 to 49

How’s Life? Well-being is the one-stop shop for the 80+ indicators of the OECD Well-being Dashboard, providing information on current well-being outcomes, well-being inequalities and the resources and risks that underpin future well-being. The 11 dimensions of current well-being relate to material conditions that shape people’s economic options (Income and Wealth, Housing, Work and Job Quality) and quality-of-life factors that encompass how well people are (and how well they feel they are), what they know and can do, and how healthy and safe their places of living are (Health, Knowledge and Skills, Environmental Quality, Subjective Well-being, Safety). Quality of life also encompasses how connected and engaged people are, and how and with whom they spend their time (Work-Life Balance, Social Connections, Civic Engagement). The distribution of current well-being is taken into account by looking at three types of inequality: gaps between population groups (horizontal inequalities); gaps between those at the top and those at the bottom of the achievement scale in each dimension (vertical inequalities); and deprivations (i.e. the share of the population falling below a given threshold of achievement). The systemic resources that underpin future well-being over time are expressed in terms of four types of capital: Economic, Natural, Human and Social.

This database provides aggregates on official development assistance (ODA), other official flows (OOF) and flows from non-governmental organisations (NGOs) or philanthropic foundations. These statistics are shown by provider over time. To assist with the transition between systems, we provide a mapping of codes between OECD.Stat (legacy) and the OECD Data Explorer. For more information on these flows, please see the OECD’s main page on development finance statistics, including Frequently Asked Questions (FAQs) on ODA. See the Converged Statistical Reporting Directives governing these data.

Private transactions are those undertaken by firms and individuals resident in the reporting country. To assist with the transition between systems, we provide a mapping of codes between OECD.Stat (legacy) and the OECD Data Explorer. For more information on these flows, please see the OECD’s main page on development finance statistics, including Frequently Asked Questions (FAQs) on ODA. See the Converged Statistical Reporting Directives governing these data.

This dataset traces net changes in terms of volume in the growing stock of standing wood on forest land. Forest depletion and growth describe balances or imbalances in different types of forests. The intensity of use of forest resources reflects various forest management methods and their sustainability. These data should be read in connection with other indicators, in particular land use changes and forest quality (species diversity, forest degradation), and be complemented with data on forest management practices and protection measures. Please bear in mind that definitions and estimation methods vary for some countries.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business datawhere composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Click to collapse Item coverage Outstanding investment by direct insurance companies, classified by investment category, by the companies' nationality and by its destination (domestic or foreign). As of 2009, investment data exclude assets linked to unit-linked products sold to policyholders.

Graduates/new entrants in each educational field as a percentage of the sum of graduates/new entrants in all fields.

Tourism can be regarded as a social, cultural and economic phenomenon related to the movement of people outside their usual place of residence.

The OECD Economic Outlook presents the OECD’s analysis of the major global economic trends and prospects for the next two years. The Outlook puts forward a consistent set of projections for output, employment, government spending, prices and current balances based on a review of each member country and of the induced effect on each of them on international developments. OECD (2024), OECD Economic Outlook No 115 (Edition 2024/1)EO115 Database documentationEO115 Last historical pointsOECD Economic Outlook website: https://www.oecd.org/economic-outlook/ Contact: [email protected]

The OECD, in cooperation with the EU, has developed a harmonised definition of urban areas which overcomes previous limitations linked to administrative definitions (OECD, 2012). According to this definition an urban area is a functional economic unit characterised by densely inhabited “city core” and “commuting zone” whose labour market is highly integrated with the core. The Metropolitan database provides indicators of 649 OECD metropolitan areas identified in 33 OECD countries and the functional urban areas of Colombia. Comparable values of population, GDP, employment, and other indicators are presented.

This dataset presents internationally comparable data on education and earnings, by educational attainment, age and gender as published in OECD Education at a Glance 2022. For trend data, Education at a Glance 2022 includes data for 2005 and 2010-2020 (or years with available data).

The nature of expenditure distinguishes between current and capital expenditure. The resource category refers to service provider (public institutions, government-dependent private institutions, and independent private institutions, i.e. both educational and other institutions). These expenditure figures are intended to represent the total cost of services provided by each type of institution, without regard to sources of funds (whether they are public or private).

Average number of teachers by sex and age.

Average number of teachers by sex and type of institution. Educational Personnel by Type of Institution, Management Personnel and Teacher Aides (archived)

This dataset contains the tenure composition (as a percentage of all job tenures). Data are broken down by professional status - employees and total employment - sex, five-year and broad age groups (15-24, 25-54, 55-64, 15-64, total, etc.). Geographic coverageIn order to facilitate analysis and comparisons over time, historical data for OECD members have been provided over as long a period as possible, often even before a country became a member of the Organisation. Information on the membership dates of all OECD countries can be found at OECD Ratification Dates.

Job tenure is measured by the length of time workers have been in their current or main job or with their current employer. This information is valuable for estimating the degree of fluidity in the labour market and in identifying the areas of economic activity where the turnover of labour is rapid or otherwise. Data are so far reported for a number of European countries and will be expanded to cover a greater number of countries.

The Fisheries Committee (COFI) from the Trade and Agriculture Directorate (TAD) collects, on an annual basis from all its participating countries, data on landings, aquaculture production, fleet, employment in the fisheries sector, and government financial transfers. Data are collected from Fisheries Ministries, National Statistics Offices and other institution designated as an official data source. Concepts Classifications Data are collected by the OECD using the methodologies established by the Coordinating Working Party on Fishery Statistics (CWP) (www.fao.org/fishery/cwp/search/en). This inter-agency body, created in 1960 to develop common procedures and standards for the collation of fisheries statistics, provides technical advice on fishery statistical matters. Its handbook of Fishery Statistical Standards comprises definitions of the various concepts used in fishery statistics, with the exception of Government Financial Transfers which is unique to the OECD. All other statistics are based on the CWP definitions. The OECD, a partner with the CWP, additionally collects information on values for its landings and records the breakdown between the types of landings (i.e. landings in domestic ports, landings in foreign ports) data series which are not collected by the FAO. While a number of countries cover landings in a similar fashion, the same does not hold true for capacity (feet/meters, GRT/engine powers), or for employment for which both Full-time equivalents or numbers of people are used. The OECD therefore does not duplicate FAO statistics but requests complementary information to feed its analytical work.

Enrolment rate per age is the percentage of students enrolled in each type of institution over the total of students

Number of students enrolled in different education programmes by age and sex.

Number of students enrolled in different education programmes by field and sex.

This indicator examines the share of students by gender, programme orientation, mode of study and type of institution over the total number of students.

Number of students enrolled in different education programmes by type of institution and sex.

Number of students enrolled in different education programmes by country of origin and sex.

Data on enterprises and employment in tourism industry.

Unit of measure used Environmental protection (EP) includes all purposeful activities directly aimed at the prevention, reduction and elimination of pollution or any other degradation of the environment resulting from production or consumption processes. The scope of Environmental Protection is defined according to the Classification of Environmental Protection Activities (CEPA), which distinguishes nine different environmental domains. Activities such as energy and material saving are only included to the extent that they mainly aim at environmental protection. An important example is recycling which is included only to the extent that it constitutes a substitute for waste management. Excluded are: (i) activities that, while beneficial to the environment, primarily satisfy technical needs or health and safety requirements for the protection of the workplace. (ii) expenditure linked to mobilisation of natural resources (e.g., water supply). (iii) calculated cost items such as depreciation (consumption of fixed capital) or the cost of capital as this questionnaire only records actual outlays. (iv) payments of interest, fines and penalties for non-compliance with environmental regulations or compensations to third parties etc., as they are not directly linked with an environmental protection activity. Environmental Protection Expenditure can be evaluated both according to the abater principle and the financing principle. This distinction makes it possible to aggregate different sectors and industries without double counting. Expenditure according to the abater principle (EXP I), includes all expenditure that the sector has for measures they themselves execute. Any economic benefits directly linked with the environmental protection activities (Receipts from by-products) are deducted in order to calculate the net amount of money spent by the sector for their own activities. The financing principle (EXP II) measures how much money a particular sector (directly) contributes to overall environmental protection activities, wherever they are executed. This means that the part of EXP I that was directly financed by others (through subsidies or revenues received) should be deducted, while the part of EXP I in other sectors that this sector finances directly (through subsidies or fees paid) should be added. The framework is based on double entry bookkeeping, where each activity and expenditure item has an abater (producer) and a financing side. This means that much expenditure by specialised producers is financed by the users of their services, mainly business sector and households. This will be recorded as Revenues for the Specialised producers (Table 4), and fees/purchases in Business and Households (Tables 2 and 3). Specialised producers include the production of environmental protection services by public and private corporations or quasi-corporations for the use of other units, mainly financed by the users of these services. These are mainly activities within ISIC Rev. 4/NACE Rev. 2 division and classes 37, 38.1, 38.2 and 39 such as: 37 Sewerage, 38.1 Waste collection, 38.2 Waste treatment and disposal, 39  Remediation activities and other waste management services. This sector is the sum of two components: a) Public specialised producers: All corporations and quasi-corporations that are subject to control by government units. Control is defined as the ability to determine general corporate policy by choosing appropriate directors, if necessary (Table 4A). b) Private specialised producers: All corporations and quasi-corporations that are not subject to control by government units (Table 4B). Specialised producers could also include for example the activities of e.g. volunteer environmental organisations or secondary environmental activities. These should be entered along with a footnote describing the coverage. CEPA domains: a column "pollution abatement and control" (PAC) has been kept in the questionnaire to ensure continuity with earlier data series.

In view of the strong demand for cross-national indicators on the situation of families and children, the OECD Family Database was developed to provide cross-national indicators on family outcomes and family policies across the OECD countries, its enhanced engagement partners and EU member states. The database brings together information from various national and international databases, both from within the OECD and from external organisations. The database classifies indicators into four main dimensions: (i) structure of families, (ii) labour market position of families, (iii) public policies for families and children and (iv) child outcomes. Detailed information on the definitions, sources and methods used in the construction of the database can be found on the OECD Family Database webpage.

This dataset FDI income main aggregates, BMD4 is updated every quarter and includes annual and quarterly aggregate Foreign Direct Investment (FDI) income for OECD member countries and for non-OECD G20 countries (Argentina, Brazil, China, India, Indonesia, Saudi Arabia and South Africa), which are included in Balance of Payments (BOP) accounts.

This dataset FDI main aggregates, BMD4 is updated every quarter and includes quarterly and annual aggregate inward and outward Foreign Direct Investment (FDI) flows, positions and income for OECD reporting economies and for non-OECD G20 countries (Argentina, Brazil, China, India, Indonesia, Saudi Arabia and South Africa). It is a simplified dataset with fewer breakdowns compared to the other separate datasets specifically dedicated to FDI flows, FDI positions or FDI income aggregates. In this dataset, FDI statistics are presented on directional basis only (unless otherwise specified, see metadata attached at the reporting country level) and resident Special Purpose Entities (SPEs), when they exist, are excluded (unless otherwise stated, see metadata attached at the reporting country level). FDI aggregates are measured in USD millions, in millions of national currency and as a share of GDP.

This dataset FDI positions main aggregates, BMD4 is updated every quarter and includes annual aggregate Foreign Direct Investment (FDI) positions for OECD member countries and for non-OECD G20 countries (Argentina, Brazil, China, India, Indonesia, Saudi Arabia and South Africa), which are included in International Investment Position (IIP) accounts. FDI positions record the total level of direct investment at a given point in time, usually the end of a quarter or of a year.

The financial indicators are based on data compiled according to the 2008 SNA "System of National Accounts, 2008". Many indicators are expressed as a percentage of Gross Domestic Product (GDP) or as a percentage of Gross Disposable Income (GDI) when referring to the Households and NPISHs sector. The definition of GDP and GDI are the following: Gross Domestic Product: Gross Domestic Product (GDP) is derived from the concept of value added. Gross value added is the difference of output and intermediate consumption. GDP is the sum of gross value added of all resident producer units plus that part (possibly the total) of taxes on products, less subsidies on products, that is not included in the valuation of output [System of National Accounts, 2008, par. 2.138]. GDP is also equal to the sum of final uses of goods and services (all uses except intermediate consumption) measured at purchasers’ prices, less the value of imports of goods and services [System of National Accounts, 2008, par. 2.139]. GDP is also equal to the sum of primary incomes distributed by producer units [System of National Accounts, 2008, par. 2.140]. Gross Disposable Income: Gross Disposable Income (GDI) is equal to net disposable income which is the balancing item of the secondary distribution income account plus the consumption of fixed capital. The use of the Gross Disposable Income (GDI), rather than net disposable income, is preferable for analytical purposes because there are uncertainty and comparability problems with the calculation of consumption of fixed capital. GDI measures the income available to the total economy for final consumption and gross saving [System of National Accounts, 2008, par. 2.145]. Definition of Debt: Debt is a commonly used concept, defined as a specific subset of liabilities identified according to the types of financial instruments included or excluded. Generally, debt is defined as all liabilities that require payment or payments of interest or principal by the debtor to the creditor at a date or dates in the future. Consequently, all debt instruments are liabilities, but some liabilities such as shares, equity and financial derivatives are not debt [System of National Accounts, 2008, par. 22.104]. According to the SNA, most debt instruments are valued at market prices. However, some countries do not apply this valuation, in particular for securities other than shares, except financial derivatives (AF33). In this dataset, for financial indicators referring to debt, the concept of debt is the one adopted by the SNA 2008 as well as by the International Monetary Fund in “Public Sector Debt Statistics – Guide for compilers and users” (Pre-publication draft, May 2011). Debt is thus obtained as the sum of the following liability categories, whenever available / applicable in the financial balance sheet of the institutional sector:special drawing rights (AF12), currency and deposits (AF2), debt securities (AF3), loans (AF4), insurance, pension, and standardised guarantees (AF6), and other accounts payable (AF8). This definition differs from the definition of debt applied under the Maastricht Treaty for European countries. First, gross debt according to the Maastricht definition excludes not only financial derivatives and employee stock options (AF7) and equity and investment fund shares (AF5) but also insurance pensions and standardised guarantees (AF6) and other accounts payable (AF8). Second, debt according to Maastricht definition is valued at nominal prices and not at market prices. To view other related indicator datasets, please refer to: Institutional Investors Indicators [add link] Household Dashboard [add link]

The financial indicators in this dataset are derived from OECD countries’ financial accounts (transactions): they give a picture of the short-term behavior of institutional sectors. They comprise for instance: Net financial transactions of the general government, as a percentage of Gross Domestic Product (GDP), which corresponds to the general government deficit; Transactions in financial assets of Households and NPISHs, as a percentage of Households Gross Disposable Income (GDI); Transactions in liabilities of Households and NPISHs, as a percentage of GDI.

Financial Indicators aim to capture in quantitative terms an important but heterogeneous and fast evolving area. Key factors driving this change are: globalisation of the financial markets; maturing of national financial markets and therefore the structure of these markets required to service their needs; increased sophistication of the actors in these markets; rapid technological change; and evolving regulatory frameworks. Financial institutions react and adapt to these conditions by changing their strategies; by specialising, by diversifying or concentrating their activities, and by extending through mergers and acquisitions. As a consequence, there is almost constant evolution in the institutional structures in which financial markets operate.   OECD statistics contact   Statistics and Data Directorate

The dataset Fisheries International collaboration in technology development (bilateral) provides the number of co-inventions (simple patent families) developed jointly by at least two inventors. This indicator is disaggregated by: Country - country of residence of the inventor(s), integral counted; in cases when inventors from more than two countries collaborate, this is translated into distinct bilateral relationships between country pairs. For example, if inventors from 3 countries collaborate (e.g. USA, DEU, JPN) then a unit count is assigned to 6 country pairs (USA-DEU, USA-JPN, DEU-JPN, DEU-USA, JPN-USA, JPN-DEU); in this case a country generally coordinate the project and the others are partners. Partner – country of residence of the inventor(s) who collaborate to the patent. Technology domain – the three main areas of innovation in fisheries and aquaculture, related to technology development. In detail: 1. Harvesting technology such as more effective ways to find or harvest fish and which are typically associated with improvements in catch per unit of effort (e.g. type/size of vessels and their methods of propulsion, search technologies, method of catching or harvesting fish and bringing them on board); 2.Aquaculture technology such as methods to more effectively grow fish in captivity (innovation in feeds, improving the health of aquaculture animals, etc.); 3. New products and markets such as the development of new fish products and markets (food technologies/processing such as the development of surimi as a crabmeat substitute) and the improvement of market access (secure or enlarge markets for fish products) that provides important incentives for green growth (e.g. eco-certification with fishers adopting by-catch saving technologies or modifying fishing practices and/or territorial user rights in fisheries).

The OECD FISH Unit, in collaboration with the Environment Directorate and the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in fisheries-related technologies. The search strategy for fisheries and aquaculture related technologies adopts a mixed solution with a definition of the technical field of interest in fisheries and aquaculture innovation complemented by keywords, e.g. by looking for keywords in the International Patent Classification (IPC) codes and checking manually the relevance of the results in the text of patents (in the title, the abstract, etc). Technology domains are detailed in the ANNEX attached below. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' fisheries, aquaculture and innovation policies.

The Fisheries R&D expenditures dataset contains the budgetary expenditures in research and development on total budgetary FSE. Three variables are presented in this dataset:  • R&D expenditures - they are budgetary expenditures that finance research and development activities related to fisheries, irrespective of the institution (private or public, ministry, university, research centre or fisher group) or where they take place, the nature of research (scientific, institutional, etc.), or its purpose. The focus is on research and development expenditures on applied research related to the fisheries sector. Social-sciences research related to fisheries is included. It is also included data dissemination when associated primarily with research and development (knowledge generation), e.g. reports from research and databases developed as an adjunct to research. •FISHERIES SUPPORT ESTIMATE - Budgetary - it is the annual monetary value of gross transfers from taxpayers to fishers arising from policy measures that support fisheries, regardless of their nature, objectives or impacts. Data on FSE are collected by the Fisheries Committee (COFI) from the Trade and Agriculture Directorate (TAD) on an annual basis from all its participating countries. Data are provided by Fisheries Ministries, National Statistics Offices and other institution designated as an official data source. The original financial data is collected in national currency at current values; they are converted and published also in US dollars, for analytical purposes and to allow data comparisons. • Share of R&D expenditures on FSE - it is the share of budgetary research and development expenditures on total budgetary FSE. Please notice that total budgetary FSE is defined ‘net’, i.e. it is adjusted for costs incurred by fishers in order to receive the support. Whenever these costs are of significant amount, total budgetary FSE becomes remarkably low or negative. The corresponding share of research and development expenditures turns into a percentage exceptionally high or negative.

The OECD Fisheries Support Estimates (FSE) database is intended to be the best source of information on fisheries policies in OECD members and participating non-OECD economies.   It is designed to monitor and quantify developments in fisheries policy, to establish a common basis for policy dialogue among countries, and to provide economic data to assess the effectiveness and efficiency of policies.   These tables report country programmes data aggregated according to the main categories presented in the FSE Manual.   More detailed documentation on country programmes can be found in country-level metadata; more data on country programmes can be found in the full dataset (Excel Format - link provided below). Statistics are organized in pivot tables to make possible cross-country comparisons and to filter disaggregated policy-level data by policy implementation criteria and country.   The FSE data collection is part of the more comprehensive data gathering carried out on an annual basis by the Fisheries Committee (COFI) of the Trade and Agriculture Directorate (TAD) from OECD members and participating non-OECD economies.   Data on landings, aquaculture production, inland fisheries catch, fleet, employment, total allowable catch (TAC) and fisheries support estimate (FSE) are collected from Fisheries Ministries, National Statistics Offices and other institutions designated as an official data source. The surveys used for this exercise are the OECD Fisheries questionnaires.

Fisheries fleet: The FAO has a two dimensional definition, of which the OECD only uses the concept of fishing vessel. Fishery Fleet: The term "fishery fleet" or "fishery vessels" refers to mobile floating objects of any kind and size, operating in freshwater, brackishwater and marine waters which are used for catching, harvesting, searching, transporting, landing, preserving and/or processing fish, shellfish and other aquatic organisms, residues and plants. Fishing vessel: The term "fishing vessel" is used instead when the vessel is engaged only in catching operations. Gross Register Tonnage: The Gross Register Tonnage represents the total measured cubic content of the permanently enclosed spaces of a vessel, with some allowances or deductions for exempt spaces such as living quarters (1 gross register ton = 100 cubic feet = 2.83 cubic metres).

Freshwater abstractions:   This dataset shows water abstractions by source (surface and ground water) and by major uses. Water abstractions refer to water taken from ground or surface water sources and conveyed to the place of use. If the water is returned to a surface water source, abstraction of the same water by the downstream user is counted again in compiling total abstractions.   When interpreting those data, it should be borne in mind that the definitions and estimation methods employed by member countries may vary considerably.   Data source(s): Joint OECD/Eurostat questionnaire on Inland Waters. Data for non-OECD countries is sourced from UNSD (https://unstats.un.org/unsd/envstats/country_files)  

Date is taken as per country metadata, and which is not having any metadata date is considered as 2023

This dataset contains incidences and gender composition of part-time employment with standardised age groups (15-24, 25-54, 55-64, 65+, total). Part-time employment is based on national definitions.  The definition of part-time work varies considerably across OECD countries Essentially three main approaches can be distinguished: i) a classification based on the worker’s perception of his/her employment situation; ii) a cut-off (generally 30 or 35 hours per week) based on usual working hours, with persons usually working fewer hours being considered part-timers; iii) a comparable cut-off based on actual hours worked during the reference week. A criterion based on actual hours will generally yield a part-time rate higher than one based on usual hours, particularly if there are temporary reductions in working time as a result of holidays, illness, short-timing, etc. On the other hand, it is not entirely clear whether a classification based on the worker’s perception will necessarily yield estimates of part-time work that are higher or lower than one based on a fixed cut-off. In one country (France) which changed from 1981 to 1982 from a definition based on an actual hours cut-off (30 hours) to one based on the respondent’s perception, the latter criterion appeared to produce slightly higher estimates.

Data include pension funds per the OECD classification by type of pension plans and by type of pension funds. All types of plans are included (occupational and personal, mandatory and voluntary). The OECD classification considers both funded and book reserved pension plans that are workplace-based (occupational pension plans) or accessed directly in retail markets (personal pension plans). Both mandatory and voluntary arrangements are included. The data include plans where benefits are paid by a private sector entity (classified as private pension plans by the OECD) as well as those paid by a funded public sector entity. A full description of the OECD classification can be found at:http://www.oecd.org/dataoecd/0/49/38356329.pdf. Pension funds include also some personal pension arrangements like the Individual Retirement Accounts (IRAs) in the United States as well as funds for government workers. The coverage of the statistics follows the regulatory and supervisory framework. All authorised pension funds are therefore normally covered by the Global Pension Statistics exercise. Assets pertaining to reserve funds in social security systems are excluded.

Data include pension funds per the OECD classification by type of pension plans and by type of pension funds. All types of plans are included (occupational and personal, mandatory and voluntary). The OECD classification considers both funded and book reserved pension plans that are workplace-based (occupational pension plans) or accessed directly in retail markets (personal pension plans). Both mandatory and voluntary arrangements are included. The data include plans where benefits are paid by a private sector entity (classified as private pension plans by the OECD) as well as those paid by a funded public sector entity. A full description of the OECD classification can be found at: http://www.oecd.org/dataoecd/0/49/38356329.pdf.  Pension funds include also some personal pension arrangements like the Individual Retirement Accounts (IRAs) in the United States as well as funds for government workers. The coverage of the statistics follows the regulatory and supervisory framework. All authorised pension funds are therefore normally covered by the Global Pension Statistics exercise. Assets pertaining to reserve funds in social security systems are excluded.

This dataset contains statistics on Consumer Price Indices - all items, for G20 countries and for the G20 as a whole.  The G20 area consists of the following economies: Argentina, Australia, Brazil, Canada, China, France, Germany, India, Indonesia, Italy, Japan, Korea, Mexico, the Russian Federation, Saudi Arabia, South Africa, Türkiye, the United Kingdom, the United States, the African Union and the European Union. 

The GID-DB is a database providing researchers and policymakers with key data on gender-based discrimination in social institutions. This data helps analyse women’s empowerment and understand gender gaps in other key areas of development.Covering 180 countries and territories, the GID-DB contains comprehensive information on legal, cultural and traditional practices that discriminate against women and girls.

This part contains general information on number of insurance companies and employees within the sector.

This table contains deflators for resource flows for individual DAC Members from 1966 as well as the TOTAL DAC deflator, and the deflator for the EURO (EC). The deflators include the effect of exchange rate changes and are therefore only applicable to US dollar figures. The OECD uses the latest deflator to convert current prices to constant prices. The latest available base year used is the base year equal to 100. The OECD applies the total DAC deflator to individual recipient countries and multilateral donors to calculate their receipts or flows in constant prices.

Bilateral ODA commitments by purpose. Data cover the years 2005 to 2009. Amounts are expressed in USD million. The sectoral distribution of bilateral ODA commitments refers to the economic sector of destination (i.e. the specific area of the recipient's economic or social structure whose development is, or is intended to be fostered by the aid), rather than to the type of goods or services provided. These are aggregates of individual projects notified under the Creditor Reporting System, supplemented by reporting on the sectoral distribution of technical co-operation, and on actual disbursements of food and emergency aid.

This dataset provides the whole set of OECD Annual government non-financial accounts and key indicators data and is recommended for users who wish to query a large amount of data. It is not designed for visualising results using the Table and Chart buttons.

Number of people who graduated from an education programme by age and sex.

Number of people who graduated from an education programme by field and sex.

Graduation/entry rates represent an estimated percentage of an age group expected to graduate/enter a certain level of education at least once in their lifetime.

The OECD Green Growth database contains selected indicators for monitoring progress towards green growth to support policy making and inform the public at large. The database synthesises data and indicators across a wide range of domains including a range of OECD databases as well as external data sources. The database covers OECD member and accession countries, key partners (including Brazil, China, India, Indonesia and South Africa) and other selected non-OECD countries.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Gross claims payments in the reporting country, containing a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. This part contains gross operating expenses in the reporting country, with a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

Productivity is a key driver of economic growth and changes in living standards. Labour productivity growth implies a higher level of output for unit of labour input (hours worked or persons employed). This can be achieved if more capital is used in production or through improved overall efficiency with which labour and capital are used together, i.e., higher multifactor productivity growth (MFP). Productivity is also a key driver of international competitiveness, e.g. as measured by Unit Labour Costs (ULC).   The OECD Productivity Database aims at providing users with the most comprehensive and the latest productivity estimates. The update cycle is on a rolling basis, i.e. each variable in the dataset is made publicly available as soon as it is updated in the sources databases. However, some time lag may arise which affects individual series and/or countries for two reasons: first, hours worked data from the OECD Employment Outlook are typically updated less frequently than the OECD Annual National Accounts Database; second, source data for capital services are typically available in annual national accounts later than source data for labour productivity and ULCs.   Note to users: The OECD Productivity Database accounts for the methodological changes in national accounts' statistics, such as the implementation of the System of National Accounts 2008 (2008 SNA) and the implementation of the international industrial classification ISIC Rev.4. These changes had an impact on output, labour and capital measurement. For Chile, China, Colombia, India, Japan, Turkey and the Russian Federation the indicators are in line with the System of National Accounts 1993 (1993 SNA); for all other countries, the indicators presented are based on the 2008 SNA

Cancer follow up has been given for the range of 5 years. The highest range has been considered as for this period, for example 1995-2000 is considered as 2000.

OECD Health Data 2016 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.

OECD Health Data 2017 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.B1:B4

This dataset presents core population health indicators, covering life expectancy; mortality indicators such as causes of mortality (by ICD codes), maternal and infant mortality, avoidable (preventable+treatable) mortality; potential years of life lost; perceived health status (also disaggregated by socio-economic status and education level); low birthweight; incidence of key communicable diseases; cancer incidence; injuries in road traffic accidents; and absence from work due to illness.

This dataset reports data on key aspects of the utilisation of healthcare, such as consultations with doctors and dentists, immunisation of children and the population aged 65+, cancer screening, hospital indicators such as discharges or average length of stay, diagnostic exams, surgical procedures and waiting times.

The Hourly Earnings dataset contains predominantly monthly statistics, and associated statistical methodological information, for the OECD member countries and for selected non-member economies. The Hourly Earnings dataset provides monthly and quarterly data on employees' earnings series. It includes earnings series in manufacturing and for the private economic sector. Mostly the sources of the data are business surveys covering different economic sectors, but in some cases administrative data are also used. The target series for hourly earnings correspond to seasonally adjusted average total earnings paid per employed person per hour, including overtime pay and regularly recurring cash supplements. Where hourly earnings series are not available, a series could refer to weekly or monthly earnings. In this case, a series for full-time or full-time equivalent employees is preferred to an all employees series.

Inbound tourism comprises the activities of a non-resident visitor within the country of reference.

Incidence of employment by usual weekly hours worked: This table contains data on the cross-country distribution of employment by hour bands for declared hour bands, broken down by professional status - employees, total employment - sex and detailed age groups. In order to facilitate analysis and comparisons over time, historical data for OECD members have been provided over as long a period as possible, often even before a country became a member of the Organisation. Information on the membership dates of all OECD countries can be found at OECD Ratification Dates

This datasetcontains the shares of involuntary part-time work among part-time workers and ratio of involuntary part-time work and labour force and the gender composition of involuntary part-time workers. Data are broken down by professional status - employees, total employment - sex and standardised age groups (15-24, 25-54, 55+, total).

The OECD Income Distribution Database (IDD) offers data on levels and trends in income inequality and poverty and is updated on a rolling basis, two to three times a year.

Data source(s) used The inland fisheries data collection is part of the more comprehensive data gathering carried out on an annual basis by the Fisheries Committee (COFI) of the Trade and Agriculture Directorate (TAD) from OECD members and participating non-OECD economies. Data on marine landings, aquaculture production, inland fisheries catch, fleet, employment, total allowable catch (TAC) and fisheries support estimate (FSE) are collected from Fisheries Ministries, National Statistics Offices and other institutions designated as an official data source. The surveys used for this exercise are the OECD Fisheries questionnaires.   Data are collected in tonnes and national currency at current values. For analytical purposes and data comparisons, value data are converted and published also in US dollars. Exchange rates are average yearly spot rates, taken from the dataset OECD Economic Outlook: Statistics and Projections. Data reported in this dataset are expressed in tonnes, in units of national currency and in US dollars. Data are recorded on a landed weight basis, i.e. the mass (or weight) of a product at the time of landing, regardless of the state in which is landed (i.e. whole, gutted, filleted, meal, etc.). For exceptions, please see the individual notes. Statistical population The statistical population is the set of countries participating in the work of the COFI, i.e. OECD members, excluding landlocked countries, with some exceptions (Czech Republic and Slovakia are included, Israel is not). The group includes also the following partner countries: Argentina, China, Colombia, Costa Rica, Indonesia, Lithuania, Peru, Philippines, Thailand and Chinese Taipei. In order to facilitate analysis and comparisons over time, historical data for OECD members have been provided over as long a period as possible, often even before a country became a member of the Organisation. Information on the membership dates of all OECD countries can be found at OECD Ratification Dates. Key statistical concept Inland fisheries include catches of fish, crustaceans, molluscs and other aquatic invertebrates (and animals), residues and seaweeds in lakes, rivers, ponds, inland canals and other land-locked water bodies. For the purpose of this questionnaire the boundary between inland and marine areas at the river mouth is left to the discretion of the national authority. Production from aquaculture installations should not be reported on this form. However, catches from fisheries that are managed by stocking should be included. The methodological reference document for fisheries and aquaculture statistics is the CWP Handbook of Fishery Statistics.

This dataset shows how much health providers spend on the inputs needed to produce healthcare goods and services (factors of provision). This information is typically tracked at national aggregate levels to meet the need to ensure an efficient, appropriate allocation of resources in the production of health care services. Specific policy needs may require information regarding total payments for human resources, expenditure on pharmaceuticals, and other significant inputs. Furthermore, the financial planning of health programmes and services often relies on information about the volume and mixture of factor spending.

Institutional Investors' Assets and Liabilities data are reported by Central Banks, National Statistical Institutes or Supervisory Authorities. The indicators reported here are compiled on the basis of those statistics.   The first set of indicators measure total financial assets (liabilities) held by each institutional investor as a percentage of GDP. Total financial assets (liabilities) is defined as the sum of the following asset (liability) categories: currency and deposits (F2), debt securities (F3), loans (F4), equity and investment fund shares (F5), insurance pension and standardized guarantee schemes (F6), financial derivatives and employee stock options (F7), and other accounts receivable (payable) (F8). The second set of indicators shows the share of each asset (liability) category in the total financial assets (liabilities) of each investor. They help to analyse the investment portfolio composition of the investor as well as financial risks borne by the investor. The third set of indicators shows the sub-sector composition of total financial assets (liabilities) by investor category, by showing the share of each sub-sector in the total financial assets (liabilities) of each investor category.

These data are part of a larger database, hosted on a different website, which includes both quantitative and qualitative data, as well as graphs.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Breakdown of net premiums written in the reporting country in terms of domestic risks and foreign risks, thus providing an indicator of direct cross-border operations of insurance business.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Covers business written abroad by branches, agencies and subsidiaries established abroad of domestic undertakings and includes all business written outside the country by these entities (in both OECD and non-OECD countries).

This data deals with premiums written by classes of non-life insurance for the business written in the reporting country.

Geographic coverage OECD countries, Selected African and Asian countries, Selected Latin American countries Institutional coverage The insurance industry is a key component of the economy by virtue of the amount of premiums it collects, the scale of its investment and, more fundamentally, the essential social and economic role it plays in covering personal and business risks. The "OECD Insurance Statistics" publication provides major official insurance statistics for all OECD countries. The reader will find information on the diverse activities of this industry and on international insurance market trends. The data, which are standardised as far as possible, are broken down under numerous sub-headings, and a series of indicators makes the characteristics of the national markets more readily comprehensible. This publication is an essential tool for civil servants, businessmen and academics working in the insurance field. Item coverage This part consists of tables by indicators, which reflect the most significant characteristics of the OECD insurance market. In most cases, the tables contain data of all OECD countries as well as aggregated "OECD", "EU15" (the 15 member countries of the European Union in 1995) and "NAFTA" data from 1983 to 2015, for the following categories: - life insurance, - non-life insurance - and total. The premiums amounts are converted from national currencies into US dollar. Exchange rates used are end-of-period exchanges rates for all variables valued at the end of the year, and period-average for variables representig a flow during the year.

This indicator reports the percentage of students of each country of origin over the total of international students.

The International Transport Forum collects, on a quarterly basis, monthly data from all its Member countries. When monthly information is not available then quarterly data is provided. The survey contains a dozen variables selected for their quarterly availability among reporting countries. Data are collected from Transport Ministries, statistical offices and other institution designated as official data source. The survey used for this exercise is the ITF "Quarterly Transport Statistics". Variables collected are rail, road and inland waterways goods transport (T-km), rail passengers (P-km), road traffic (V-km), first registration of brand new vehicles, petrol deliveries to the road transport sector and road fatalities. Although there are clear definitions for all the terms used in this survey, countries might have different methodologies to gather or estimate quarterly data. The information provided in short-term surveys does not necessarily have the same coverage as annual data exercises and therefore remains provisional. Depending on countries, data is not always revised so totals might not correspond to the sum of the elements. The main purpose of this data collection is to identify in advance changes in transport data trends. In case of missing data for a country, ITF can calculate estimates based generally on growth rates from previous years or from data available from other sources. These estimates are used solely to calculate aggregated trends in graphic representations and are not shown at the individual country level.  

This table contains data on involuntary part-time workers by professional status. Data are broken down by professional status - employees, total employment - by sex and standardised age groups (15-24, 25-54, 55+, total). Involuntary part-time workers are part-timers (working less than 30-usual hours per week) because they could not find a full-time job. However, the definitions are not harmonised which hampers the comparison across countries. Unit of measure used - Data are expressed in thousands of persons

This table contains figures on the activity of affiliates under foreign control and all firms by industry according to the International Standard Industrial Classification (ISIC Revision 4).

Tourism GDP corresponds to the part of GDP generated by all industries in response to internal tourism consumption. A further distinction must be made between direct tourism GDP and indirect tourism GDP. Put simply, tourism direct GDP is generated by industries directly in contact with visitors, while indirect tourism GDP is generated by industries supplying inputs to industries directly in contact with the visitors. The Tourism Staellite Account (TSA) Framework limits its recommendations to the evaluation of direct tourism GDP.

This dataset contains data on employment by hour bands for usual weekly hours worked in the main job.  Standard hour bands are reported for most countries.  Actual hours of work instead of usual hours of work are only available in some countries (Japan and Korea).  Data are broken down by professional status - employees, total employment - by sex and standardised age groups (15-24, 25-54, 55+, total). Unit of measure used - Data are expressed in thousands of persons. For detailed information on labour force surveys for all countries please see the attached file : www.oecd.org/els/employmentpoliciesanddata/LFSNOTE

Rivers Data show water quality of selected rivers. Water quality is measured in terms of annual mean concentrations of dissolved oxygen and BOD; of nitrates, phosphorus and ammonium; and of lead, cadmuim, chromium and copper. The rivers selected are main rivers draining large watersheds in the countries chosen; the measurement locations are at the mouths or downstream frontiers of the rivers. These parameters provide information concerning the state and trends of pollution by organic matter and nutrients, heavy metals and other metals. In reading the data, one should compare trends rather than absolute values, since measurement methods vary by country. Lakes Data show trends in annual mean concentrations of phosphorus and nitrogen in selected lakes. These parameters concern nutrient concentrations and related degrees of eutrophication of lakes and reservoirs. The interpretation of these tables should take into account variations in the methods of sampling (e.g. sampling location and number of measurements at different sampling locations and in different years).

Land resources are one of the four components of the natural environment: water, air, land and living resources. In this context land is both: a physical "milieu" necessary for the development of natural vegetation as well as cultivated vegetation;a resource for human activities.  The data presented here give information concerning land use state and changes (e.g. agricultural land, forest land).  Land area excludes area under inland water bodies (i.e. major rivers and lakes).   Arable refers to all land generally under rotation, whether for temporary crops (double-cropped areas are counted only once) or meadows, or left fallow (less than five years). These data are not meant to indicate the amount of land that is potentially cultivable.  Permanent crops are those that occupy land for a long period and do not have to be planted for several years after each harvest (e.g. cocoa, coffee, rubber). Land under vines and trees and shrubs producing fruits, nuts and flowers, such as roses and jasmine, is so classified, as are nurseries (except those for forest trees, which should be classified under "forests and other wooded land").  Arable and permanent crop land is defined as the sum of arable area and land under permanent crops.  Permanent meadows and pastures refer to land used for five years or more to grow herbaceous forage crops, either cultivated or growing wild (wild prairie or grazing land).  Forest refers to land spanning more than 0.5 hectare (0.005 km2) and a canopy cover of more than 10 percent, or trees able to reach these thresholds in situ. This includes land from which forests have been cleared but that will be reforested in the foreseeable future. This excludes woodland or forest predominantly under agricultural or urban land use and used only for recreation purposes.

The productivity and income estimates presented in this dataset are mainly based on GDP, population and employment data from the OECD Annual National Accounts. Hours worked are sourced from the OECD Annual National Accounts, the OECD Employment Outlook and national sources. The OECD Productivity Database aims at providing users with the most comprehensive and the latest productivity estimates. The update cycle is on a rolling basis, i.e. each variable in the dataset is made publicly available as soon as it is updated in the sources databases. However, timely data issues may arise and affect individual series and/or individual countries. In particular, annual hours worked estimates from the OECD Employment Outlook are typically updated less frequently (once a year, in the summer) than series of hours worked from the OECD Annual National Accounts.

This table contains labour force data on labour market status - population, labour force, unemployment and employment - by sex and by detailed age groups and standard age groups (15-24, 25-54, 55-64, 65+, total). Note: Population figures reported in table LFS by sex are Census-based, while the data for this table are taken from labour force surveys. Population for total age group refers to working age population (15 to 64 years).

This dataset contains the age composition (as a percentage of all ages) of the population for each labour force status - labour force, employment, unemployment - by sex.

The OECD Long-Term Baseline is a projection of some major economic variables beyond the short-term horizon of the OECD Economic Outlook. It covers all OECD economies, non-OECD G20 economies and selected key partners. The projection horizon is currently 2060. For the historical period and the short-run projection horizon, the series are consistent with those of the OECD Economic Outlook number 114. The definitions, sources and methods are also generally the same. For more details on the methodology, please see boxes and Annex in Guillemette, Y. and J. Château (2023), 'Long-Term Scenarios: Incorporating the Energy Transition', OECD Economic Policy Papers, No. 33, OECD Publishing, Paris, and references therein. The baseline scenario is a projection conditional on a number of assumptions, notably that countries do not carry out institutional and policy reforms (see section 2 of the reference cited above). It is used as a reference point to illustrate the potential impact of structural reforms in alternative scenarios. The energy transition scenario is an alternative scenario with accelerated energy transition broadly consistent with net zero GHG emissions by 2050 (see section 3 of the reference cited above).

The OECD Main Science and Technology Indicators (MSTI) provide a set of indicators that compare the Science and Technology (S&T) performance of OECD member countries and selected non-member economies. The MSTI database focuses principally on tracking financial and human resources devoted to research and experimental development (R&D), as defined in the OECD Frascati Manual, complemented by additional indicators of outputs and potential outcomes of S&T activities, namely patent data and international trade in R&D-intensive industries. MSTI also comprises several OECD economic and demographic statistical series which are used to calculate relevant benchmarks that account for differences in the relative size of economies, purchasing power and the effect of inflation.

This dataset contains statutory and national minimum wages in 30 OECD Member countries, Brazil, Malta, Romania and the Russian Federation. For detailed country notes: see http://www.oecd.org/employment/emp/Minimum-wages.pdf

Database published : June 2020 

Database published : June 2020 

The International Trade (MEI) dataset contains predominantly monthly merchandise trade statistics, and associated statistical methodological information, for all OECD member countries and for all non-OECD G20 economies and the EU.   The dataset itself contains international trade statistics measured in billions of United States dollars (USD) for: Exports, Imports, Balance. In all cases a lot of effort has been made to ensure that the data are internationally comparable across all countries presented and that all the subjects have good historical time-series’ data to aid with analysis.

Air pollution is considered one of the most pressing environmental and health issues across OECD countries and beyond. According to the World Health Organisation (WHO), exposure to fine particulate matter (PM2.5) and ground-level ozone (O3) have potentially the most significant adverse effects on health compared to other pollutants. PM2.5 can be inhaled and cause serious health problems including both respiratory and cardiovascular disease, having its most severe effects on children and elderly people. Exposure to PM2.5 has been shown to considerably increase the risk of heart disease and stroke in particular. For these reasons, population exposure to (outdoor or ambient) PM2.5 has been identified as an OECD Green Growth headline indicator. Exposure to ground-level ozone (O3) has serious consequences for human health, contributing to, or triggering, respiratory diseases. These include breathing problems, asthma and reduced lung function (WHO, 2016; Brauer et al., 2016). Ozone exposure is highest in emission-dense countries with warm and sunny summers. The most important determinants are background atmospheric chemistry, climate, anthropogenic and biogenic emissions of ozone precursors such as volatile organic compounds, and the ratios between different emitted chemicals.

This dataset presents trends in amounts of municipal waste generated (including household waste), and the treatment and disposal method used. The amount of waste generated in each country is related to the rate of urbanisation, the types and pattern of consumption, household revenue and lifestyles.

It presents fixed assets by activity according to the classification ISIC rev.3 and by type of product and by type of assets.  It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. In national currency, in current prices and constant prices (national base year and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

The National Accounts at a Glance (NAAG) is based on the original publication and has nine chapters: The first chapter focuses on indicators of Gross Domestic Product (GDP). The second is about income and related indicators and presents measures of net national income, savings and net lending/net borrowing. The third chapter looks at the expenditure approach to GDP, with information on the key components of demand and imports. The fourth chapter presents indicators from a production perspective. The fifth chapter looks at household sector indicators such as household disposable income, saving and net worth. The sixth chapter focuses on general government, presenting indicators such as general government revenue, expenditure and gross debt. The seventh chapter looks at financial and non-financial corporations. The eighth chapter presents indicators of capital stock and depreciation. Finally, chapter 9 provides reference indicators, important in their own right but also because they are used in the construction of many of the indicators presented elsewhere in NAAG.

It presents gross capital formation, gross fixed capital formation, changes in inventories and acquisition less disposals of valuables broken down by detailed industries. Gross fixed capital formation is also available broken down by type of assets. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

National Accounts - Volume IIIa - Financial Accounts - Flows, which record, by type of financial instruments, the financial transactions between institutional sectors, and are presented in two tables: Financial accounts, consolidated and Financial accounts, non-consolidated.

Statistical population: Its presents output, intermediate consumption and the gross value added and its components, in particular compensation of employees and gross operating surplus and mixed income, broken down by detailed industries. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. Data presented in this table will not be updated after summer 2010. Data reported to the OECD by countries in their answers to the annual national accounts questionnaire are now available on theme Industry and Services, Structural Analysis (STAN) Databases. Unit of measure used: In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

The "National CPI Weights" dataset contains the annual expenditure weights for the national CPI for the OECD Member countries at a detailed level of the COICOP classification (except Australia and Korea). The weight of a product in a CPI is the proportion of total household expenditure which is spent on that product during the weight reference period.

National landings in domestic ports

The Fisheries Committee (COFI) from the Trade and Agriculture Directorate (TAD) collects, on an annual basis from all its participating countries, data on landings, aquaculture production, fleet, employment in the fisheries sector, and government financial transfers. Data are collected from Fisheries Ministries, National Statistics Offices and other institution designated as an official data source. The OECD, a partner with the CWP, additionaly collects information on values for its landings and records the breakdown between the types of landings (i.e. landings in domestic ports, landings in foreign ports) data series which are not collected by the FAO. While a number of countries cover landings in a similar fashion, the same does not hold true for capacity (feet/meters, GRT/engine powers), or for employment for which both Full-time equivalents or numbers of people are used. The OECD therefore does not duplicate FAO statistics but requests complementary information to feed its analytical work.  

This indicator measures the net costs paid by parents for full-time centre-based childcare, after any benefits designed to reduce the gross childcare fees. Childcare benefits can be received in the form of childcare allowances, tax concessions, fee rebates and increases in other benefit entitlements.

Number of new entrants in a given programme by age and sex.

This dataset provides the whole set of OECD annual non-financial accounts by institutional sector data and is recommended for users who wish to query a large amount of data. It is not designed for visualising results using the Table and Chart buttons. To access the ‘Developer API query builder’, click on the ‘Developer API’ button above. The application programming interface (API), based on the SDMX standard, allows a developer to access the data using simple RESTful URL and HTTP header options for various choices of response formats including JSON. The query filter is generated according to the current data selection. To change the data selection, use the filters on the left. To get started check the API documentation .For any question contact us

This table presents the full sequence of non-financial accounts in the national accounts from the production account to the capital account. The sequence of non-financial accounts is presented for the economy of each country (or area) as a whole and also for its sectors: Non-financial Corporations, Financial Corporations, General Government, Households and Non-profit institutions serving households (NPISHs) and for the Rest of the world account. This table presents the Revenue (or Resources) side of the accounts, including the balancing items. It is designed to be used in conjunction with the table entitled 'Quarterly non-financial accounts by institutional sector (Expenditure)'. The presentation is on a country-by-country basis. Users are recommended to select one country (or area) at a time in the ‘Reference area’ filter in order to view the full sequence of non-financial accounts. Alternatively, specific lines within the sequence can be selected using the ‘Transaction’ filter to compare this item for combinations of sectors, countries and time periods. These indicators were presented in the previous dissemination system in the QASA_TABLE801 dataset. Explore also the GDP and non-financial accounts webpage: GDP and non-financial accounts webpage OECD statistics contact: [email protected]

Non-medical determinants of health: Unhealthy lifestyles and poor environments cause millions of people to die prematurely. Smoking, harmful alcohol use, physical inactivity and obesity are the root cause of many chronic conditions. This dataset presents the latest data for tobacco consumption (including daily smokers by age and sex), vaping (by age and sex), alcohol consumption, fruits and vegetables consumption, as well as measured and self-reported data on overweight and obesity.

 These tables are a complement to the report Agricultural Policy Monitoring and Evaluation 2011 : OECD COUNTRIES AND EMERGING ECONOMIES. They comprise the summary of agricultural support estimates for OECD countries.

The OECD Digital Economy Outlook 2020 examines trends and analyses emerging opportunities and challenges in the digital economy. It highlights how OECD countries and partner economies are taking advantage of information and communication technologies (ICTs) and the Internet to meet their public policy objectives. Through comparative evidence, it informs policy makers of regulatory practices and policy options to help maximise the potential of the digital economy as a driver for innovation and inclusive growth.   This third edition of the OECD Digital Economy Outlook provides a holistic overview of converging trends, policy developments and data on both the supply and demand sides of the digital economy. It illustrates how the digital transformation is affecting economies and societies. Finally, it provides a special focus on how the COVID-19 pandemic is amplifying opportunities and challenges from the digital transformation.

The OECD Science, Technology and Industry Outlook reviews key trends in STI policies and performance in OECD countries and major emerging economies. It is published every two years and draws on a unique international policy survey conducted by the OECD - with more than 45 countries involved in 2014 - and the latest OECD work on STI policy analysis and measurement. Following an overview of the recent STI global landscape, key current policy issues are discussed across a series of thematic policy profiles. Country profiles report the STI performance of individual countries and the most recent national policy developments.

The Agricultural Outlook has been prepared as a joint report by the Organisation for Economic Co-operation and Development (OECD) and the Food and Agriculture Organization (FAO) of the United Nations. The report provides a ten year forward looking, assessment of trends and prospects in the major temperate-zone agricultural commodity markets of biofuels, cereals, oilseeds and oilseed products, sugar, meat, fish and sea food, dairy products, cotton, roots and tubers and pulses. It is published annually, in the middle of the second quarter, as part of a continuing effort to promote informed discussion of emerging market and policy issues. The data used to develop the projections underlying the assessment are those available as of January 2023. The projections and assessments provided in the report are the result of close co-operation between the OECD and FAO Secretariats and national experts with a jointly developed modelling system, based on the AGLINK-COSIMO model, used to facilitate consistency in the projections. The data series for the projections are drawn from OECD and FAO databases. For the most part information in these databases has been taken from national statistical sources. For further details on particular series, enquiries should be directed to the OECD and FAO Secretariats.

Outbound tourism comprises the activities of residents of a given country travelling to and staying in places outside their country of residence.

This table contains figures on the activity of affiliates located abroad by host country in the total manufacturing, total services and total business enterprise sectors. The units used to present data in AMNE are millions of national currency for monetary variables and units for the other variables. Monetary variables are in current prices. Euro-area countries: national currency data is expressed in euro beginning with the year of entry into the Economic and Monetary Union (EMU). For years prior to the year of entry into EMU, data have been converted from the former national currency using the appropriate irrevocable conversion rate. This presentation facilitates comparisons within a country over time and ensures that the historical evolution is preserved. Please note, however, that pre-EMU euro are a notional unit and should not be used to form area aggregates or to carry out cross-country comparisons.

This table contains figures on the activity affiliates located abroad by industry according to the International Standard Industrial Classification (ISIC Revision 4). The units used to present data in AMNE are millions of national currency for monetary variables and units for the other variables. Monetary variables are in current prices. Euro-area countries: national currency data is expressed in euro beginning with the year of entry into the Economic and Monetary Union (EMU). For years prior to the year of entry into EMU, data have been converted from the former national currency using the appropriate irrevocable conversion rate. This presentation facilitates comparisons within a country over time and ensures that the historical evolution is preserved. Please note, however, that pre-EMU euro are a notional unit and should not be used to form area aggregates or to carry out cross-country comparisons.

The International Transport Forum collects data on transport statistics on annual basis from all its Member countries. Data are collected from Transport Ministries, statistical offices and other institution designated as official data source. Variables collected are inland transport of goods (T-km), of passengers (P-km) and road injury accidents. Additional information is also gathered on containers transported by rail and sea (Tons and TEU) as well as short sea shipping data (T-km).

The Population and Vital Statistics dataset presents components of change in the population during one year and mid-year population data for the 34 OECD member countries. Data are presented in thousands of persons and as rates in per 1000. The components of change in the population during one year are presented as follow: the first statistics refer to the population on January 1st for each year, the natural increase of the population is the difference between the number of births and deaths over the calendar year, the addition of net migration and statistical adjustments to the natural increase gives the total increase of the population over the calendar year. The addition of the total population increase to the population on January 1st gives the population on December 31st. Note: No longer this dataset be collected by OECD. Population and demographic events are available from the United Nation database at "https://esa.un.org/unpd/wpp/Download/Standard/Population/."    

This dataset contains the number of people by sex and age group per country.

The 'Production and Sales (MEI)' dataset is a dataset containing predominantly monthly statistics, and associated statistical methodological information, for the 34 OECD member countries and for selected other economies. The Production and Sales dataset contains industrial statistics on four separate subjects: Production; Sales; Orders; and Work started. The data series presented within these subjects have been chosen as the most relevant industrial statistics for which comparable data across countries is available. For Production, data comprise Indices of industrial production (IIP) for total industry, manufacturing, energy and crude petroleum; and further disaggregation of manufacturing production for intermediate goods and for investment goods and crude steel. For others, they comprise retail trade and registration of passenger cars; and permits issued and work started for dwellings. Considerable effort has been made to ensure that the data are internationally comparable across all countries presented, coverage for as many countries as possible, and that all the subjects have reasonable length of time-series to assist analysis. Most data are available monthly and are presented as an index (where the year 2010 is the base year) or as a level depending on which measure is seen as the most appropriate and/or useful in the economic analysis context. Due to differences in statistical or economic environment at country level, however, availability of data varies from one country to another.

The OECD Productivity Database aims at providing users with the most comprehensive and the latest productivity estimates. The update cycle is on a rolling basis: each variable in the dataset is made publicly available as soon as it is updated in the sources databases. The productivity database contains data on labour productivity both measured using employment or hours worked and the compenents of capital and labour inputs. The productivity database in levels, in growth rates and by industry contains annual data, while the database on productivity and unit labour costs are quarterly estimates. Further information for all datasets and the methodology may be found in the attached file OECD-Productivity-Statistics-Database-metadata

Distribution of graduates/new entrants by gender, country of origin and age as well as the proportion of each tertiary educational level over the total of first-time graduates and new entrants at tertiary level.

Data cover both social security reserve funds and sovereign pension reserve funds, the two main categories of public pension reserve funds. Social security reserve funds are set up as part of the overall social security system. They are funded chiefly by surpluses from employee and/or employer contributions over current payouts and, in some cases, by top-up contributions from the government through fiscal transfers and other sources. They may be managed either as part of a national social security scheme or by an independent - often public sector - fund management entity. Sovereign pension reserve funds are funds established by governments (independently of social security systems), who finance them directly through fiscal transfers. They are usually mandated to finance public pension expenditures at a specific future date. Some are not allowed to make any payouts for decades.

This dataset contains Purchasing Power Parities (PPPs) for all OECD countries. PPPs are the rates of currency conversion that eliminate the differences in price levels between countries. Per capita volume indices based on PPP converted data reflect only differences in the volume of goods and services produced. Comparative price levels are defined as the ratios of PPPs to exchange rates. They provide measures of the differences in price levels between countries. The PPPs are given in national currency units per US dollar. The price levels and volume indices derived using these PPPs have been rebased on the OECD average. Per capita volume indices should not be used to rank countries as PPPs are statistical constructs rather than precise measures. Minor differences between countries should be interpreted with caution.

These tables contain research and development (RD) personnel statistics. Number of RD personnel is provided in both headcounts and full-time equivalent on RD by sex, sector of employment (business enterprise, government, higher education, and private non-profit) and by occupation (researchers, technicians and other support staff).

The Regional Database contains annual data from 1995 to the most recent available year. The data collection is undertaken by the Directorate of Public Governance and Territorial Development, within the Regional Development Policy division (GOV/RDP). Statistics are collected through an annual questionnaire sent to the delegates of the Working Party on Territorial Indicators (WPTI), and through access to the web-sites of National Statistical Offices and Eurostat. The WPTI is responsible for developing regional (subnational) and urban statistics and providing analysis to support policy evaluations. The Regional Database includes statistics on the regional distribution of resources, regional disparities, and how regions contribute to national growth and the well-being of society. Under this framework, the Regional Database is one of the pillars for providing indicators to the publication OECD Regions at a Glance (link).

The Regional Database contains annual data from 1995 to the most recent available year (generally 2016 for demographic, 2015 for labor market data and 2014 for regional accounts, innovation and social statistics).

The Regional Database contains annual data from 1995 to the most recent available year (generally 2014 for demographic and labour market data, 2013 for regional accounts, innovation and social statistics).   In any analytical study conducted at sub-national levels, the choice of the territorial unit is of prime importance. The territorial grids (TL2 and TL3) used in this database are officially established and relatively stable in all member countries, and are used by many as a framework for implementing regional policies. This classification - which, for European countries, is largely consistent with the Eurostat classification - facilitates greater comparability of regions at the same territorial level. The differences with the Eurostat NUTS classification concern Belgium, Greece and the Netherlands where the NUTS 2 level correspond to the OECD TL3 and Germany where the NUTS1 corresponds to the OECD TL2 and the OECD TL3 corresponds to 97 spatial planning regions (Groups of Kreise). For the United Kingdom the Eurostat NUTS1 corresponds to the OECD TL2. Due to limited data availability, labour market indicators in Canada are presented for a different grid (groups of TL3 regions). Since these breakdowns are not part of the OECD official territorial grids, for the sake of simplicity they are labelled as Non Official Grids (NOG).

The Regional well-being dataset presents eleven dimensions central for well-being at local level and for 395 OECD regions, covering material conditions (income, jobs and housing), quality of life (education, health, environment, safety and access to services) and subjective well-being (social network support and life satisfaction). The set of indicators selected to measure these dimensions is a combination of people's individual attributes and their local conditions, and in most cases, are available over two different years (2000 and 2014). Regions can be easily visualised and compared to other regions through the interactive website [www.oecdregionalwellbeing.org]. The dataset, the website and the publications "Regions at a Glance" and "How’s life in your region?" are outputs designed from the framework for regional and local well-being. The Regional income distribution dataset presents comparable data on sub-national differences in income inequality and poverty for OECD countries. The data by region provide information on income distribution within regions (Gini coefficients and income quintiles), and relative income poverty (with poverty thresholds set in respect of the national population) for 2013. These new data complement international assessments of differences across regions in living conditions by documenting how household income is distributed within regions and how many people are poor relatively to the typical citizen of their country. For analytical purposes, the OECD classifies regions as the first administrative tier of sub-national government, so called Territorial Level 2 or TL2 in the OECD classification. This classification is used by National Statistical Offices to collect information and it represents in many countries the framework for implementing regional policies. Well-being indicators are shown for the 395 TL2 OECD regions, equivalent of the NUTS2 for European countries, with the exception for Estonian where well-being data are presented at a smaller (TL3) level and for the Regional Income dataset, where Greece, Hungary and Poland data are presented at a more aggregated (NUTS1) level.

Residential Property Prices Indices (RPPIs) – also named House price indices (HPIs), are index numbers that measure the price of residential properties over time. RPPIs are key statistics not only for citizens and households across the world, but also for economic and monetary policy makers. Among their professional uses, they serve, for example, to monitor macroeconomic imbalances and risk exposure of the financial sector. This dataset covers the 34 OECD member countries and some non-member countries. Please note that not all RPPIs are available for all countries. For instance, the RPPI at the most aggregate level for the United States only covers single-family dwellings, not all types of dwellings as it is the case for most other OECD countries. This dataset presents, for each country, the RPPI that is available at the most aggregate level. It mainly contains quarterly statistics. The dataset called “Residential Property Price Indices (RPPIs) – Complete dataset” contains the full list of available RPPIs. The dataset called “Analytical house price indicators” contains, in addition to nominal RPPIs, information on real house prices, rental prices and the ratios of nominal prices to rents and to disposable household income per capita. The datasets “Analytical house price indicators” and “Residential Property Price Indices (RPPIs) – Headline Indicators” do not refer to the same price indices for Brazil, Canada, China, Germany, the United States and the Euro area. These differences are further documented in country-specific metadata. For the United States, the series used in “Analytical house price indicators” is included in the dataset called “Residential Property Price Indices (RPPIs) – Complete database”, but is not the headline indicator. For all other countries, non-seasonally adjusted price indices in both datasets are identical in the period in which they overlap.For all other countries, non-seasonally adjusted price indices in both datasets are identical on the overlapping period.

Data on government sector receipts, and on taxes in particular, are basic inputs to most structural economic descriptions and economic analyses and are increasingly used in international comparisons. This annual database presents a unique set of detailed and internationally comparable tax data in a common format for all OECD countries.

A key set of information for policy analysis is i) how much revenue is collected; ii) in what ways is it collected; iii) from which institutional units of the economy are revenues raised for each particular financing scheme; and iv) which financing schemes receive those revenues. This dataset provides information about the contribution mechanisms the particular financing schemes use to raise their revenues. Understanding the nature of the flows is of importance from the perspective of both health and public finance policy. For example, the classification of revenues make it possible to distinguish between public and private funding of health care finance. Understanding how resources are raised by financing schemes is important for many countries, as many health systems are struggling with the issue of funding. The classification of revenues of financing schemes is suitable for tracking the collection mechanisms of a financing framework. Furthermore, the new classification makes it possible to analyse the contribution of the institutional units to health financing.

The OECD STRI is a unique, evidence-based tool that collects information on services trade restrictions across 22 services sectors. The project has two distinct but complementary instruments: a services trade regulatory database and a services trade restrictiveness index. Based on the qualitative information in the database, composite indices quantify the identified restrictions across five standard policy categories, with values between zero and one. Complete openness to trade and investment gives a score of zero, while being completely closed to foreign services providers yields a score of one.

This indicator shows the percentage of international students in each field of education.

The aim of the OECD’s new Skills for Jobs Indicators is to facilitate better adaptation to changing skill needs by making available a database of skill imbalances indicators that is comparable across countries and regularly updated. The Skill Needs Indicators provide an overview of the shortages and surpluses of skills across countries.

Social expenditure aggregates: The OECD Social Expenditure Database (SOCX) has been developed in order to serve a growing need for indicators of social policy. It includes reliable and internationally comparable statistics on public and mandatory and voluntary private social expenditure at programme level. SOCX provides a unique tool for monitoring trends in aggregate social expenditure and analysing changes in its composition.

The OECD Social Expenditure Database (SOCX) has been developed in order to serve a growing need for indicators of social policy. It includes reliable and internationally comparable statistics on public and mandatory and voluntary private social expenditure at programme level. SOCX provides a unique tool for monitoring trends in aggregate social expenditure and analysing changes in its composition. It covers 35 OECD countries for the period 1980-2013/14 and estimates for aggregates for 2014-16. The main social policy areas are as follows: Old age, Survivors, Incapacity-related benefits, Health, Family, Active labor market programmes, Unemployment, Housing, and Other social policy areas. This version also includes estimates of net total social spending for 2013 for 34 OECD countries.

STAN database for structural analysis provides analysts and researchers with a comprehensive tool for analysing industrial performance at a relatively detailed level of activity across countries. It includes annual measures of output, value added and its components, labour input, investment and capital stock thus allowing to construct indicators which focus on productivity growth, competitiveness and general structural change. STAN is primarily based on Member countries' Annual National Accounts by economic activity tables compiled according to the recommendations of System of National Accounts 2008 (SNA 2008). Previous versions of STAN (from 2000) were based on SNA93 statistics. Missing data are estimated using other sources such as national industrial surveys/censuses. Time series are extended back to the 1970's where possible. This is done using vintage SNA93 or STAN estimates. In STAN, many data points are Secretariat's estimates and are flagged to the attention of users; as such, they do not represent official Member countries' submissions. The current version of STAN is using an industry list based on the International Standard Industrial Classification of all economic activities, Revision 4 (ISIC Rev. 4). Earlier versions of STAN were based on ISIC Rev. 3 and, prior to 2000, ISIC Rev. 2 (the latter covering the manufacturing industries only).The industries covered in STAN provide sufficient detail to highlight technology and digital-intensive sectors.

Input-Output tables describe the sale and purchase relationships between producers and consumers within an economy. They can be produced by illustrating flows between the sales and purchases (final and intermediate) of industry outputs or by illustrating the sales and purchases (final and intermediate) of product outputs. The OECD Input-Output database is presented on the former basis, reflecting in part the collection mechanisms for many other data sources such as research and development Research and Development expenditure data, employment statistics, pollution data, energy consumption, which are in the main collected by enterprise or by establishment, and thus according to industry classifications.

Input-Output tables describe the sale and purchase relationships between producers and consumers within an economy. They can be produced by illustrating flows between the sales and purchases (final and intermediate) of industry outputs or by illustrating the sales and purchases (final and intermediate) of product outputs. The OECD Input-Output database is presented on the former basis, reflecting in part the collection mechanisms for many other data sources such as research and development Research and Development expenditure data, employment statistics, pollution data, energy consumption, which are in the main collected by enterprise or by establishment, and thus according to industry classifications.

The dataset on Statistical discrepancy (Institutional Investors – Financial Balance Sheets) represents the time series of the dataset on Institutional investors' assets and liabilities (7II) along with those of the dataset on Financial Balance Sheets (720), for the financial instruments and institutional sectors which are in common to these two datasets.  Additionally, for each of the above-mentioned time series, a statistical discrepancy is reported in order to show any possible differences which may exist between the two datasets (7II and 720).  In fact, the dataset on Institutional investors' assets and liabilities (7II) constitutes an attempt to better integrate these data in the framework of the System of National Accounts 2008 (SNA 2008).  However, discrepancies may exist and may, for example, be caused by balancing practices (e.g. when sector and counterpart sector data are reconciled) in the compilation of Financial Balance Sheets at a higher level of aggregation, which may not have been carried through at a lower level of aggregation. Moreover, differences may also be caused by the use of different source data.

The OECD indicators of employment protection legislation evaluate the regulations on the dismissal of workers on regular contracts and the hiring of workers on temporary contracts. They cover both individual and collective dismissals.The indicators have been compiled using the Secretariat’s own reading of statutory laws, collective bargaining agreements and case law as well as contributions from officials from OECD member countries and advice from country experts

This table reports self-employed social security contribution rates and related provisions. A representative case is used for those countries where social security provisions vary by locality. Threshold and maximum contribution amounts are shown in national currencies.

This dataset presents internationally comparable data on (full-time) salaries of teachers and school heads in public institutions at pre-primary, primary and general (lower and upper) secondary education. Actual salaries are displayed by level of education and are also available by age and gender. Data also include other statistics related to salaries of teachers.

This dataset presents internationally comparable data on (full-time) salaries of teachers and school heads in public institutions at pre-primary, primary and general (lower and upper) secondary education. Statutory salaries are displayed by level of education, Data also include other statistics related to salaries of teachers.

This dataset presents internationally comparable data on (full-time) salaries of teachers and school heads in public institutions at pre-primary, primary and general (lower and upper) secondary education. Statutory salaries are displayed by level of education, Data also include other statistics related to salaries of teachers.

This dataset presents the latest data on the state of threatened species, by species type.    When interpreting these data, it should be borne in mind that the number of species known does not always accurately reflect the number of species in existence and that varying definitions can limit comparability across countries.   Data source(s): OECD Annual Quality Assurance (AQA) questionnaire.

Since new and young firms contribute critically to job creation, innovation and growth, observing recent trends of firm formation provides valuable information to policy makers. Seasonal adjustment: For the purpose of presentation of quarterly series, seasonal adjustment is applied using TramoSeats algorithm with 5 regressors: log/level, trading days, Easter, outlier detection, and automatic model identification). Series are log-transformed and decomposed into a trend component. Finally, index is calculated based on a 2007 (2007 = average of 2007 quarters) in order to present movements between the base year and a given quarter.

This dataset shows import and export values (in millions of UDS) using product classification at 2-digit level of CPA classification.

The central issue of trade by enterprise characteristics is to disaggregate trade flows according the characteristics of the enterprises engaged in cross-border transactions. The feasibility of doing so largely depends on the possibility of using or developing common identifiers between the trade register and the business register. Countries differ in their ability to perform such a linking, and matching ratios (between business and trade registers) vary across countries, and as a consequence the degree of representativeness of the results also varies across countries.

This table presents export/import information by enterprise size class and partner country.

This dataset shows the number of exporters and importers and their associated trade values for a selected set of partner countries and zones, broken down by three economic sectors: industry, trade and repair and other sectors. Total values for the wide economy are also displayed.Recommended uses and limitations EU countries break down trade data into Intra- and extra- EU zones, whereas non EU countries report their Total trade. Trade values have been aggregated for EU countries and Total (Intra-EU plus Extra-EU) trade flows are displayed, whereas Intra and Extra-EU data expressed in term of number of enterprises cannot be summed up, because of possible double-counting (same enterprise can be trader in both intra- and extra- EU trade). Data have been collected in ISIC revision 3 from 2003 up to 2007 and in ISIC revision 4 as from reference year 2008. Time series are affected by this change in classification, and thus data are displayed into two separate databases.

The central issue of trade by enterprise characteristics is to disaggregate trade flows according the characteristics of the enterprises engaged in cross-border transactions. The feasibility of doing so largely depends on the possibility of using or developing common identifiers between the trade register and the business register. Countries differ in their ability to perform such a linking, and matching ratios (between business and trade registers) vary across countries, and as a consequence the degree of representativeness of the results also varies across countries.

This dataset (TEC 01) presents a breakdown by economic activity according to International Standard Industrial Classification, Revision 4 (ISIC Rev. 4) and by employment size class. International trade statistics are among the most widely available and consulted data, and offer a picture of trade flows between countries, broken down by types of goods and services. However, such conventional international trade statistics do not offer insights into the actors who are actually engaged in cross-border trade. The Trade by Enterprise Characteristics (TEC) database aims to fill this gap, and contains international annual trade in goods data broken down by different categories of enterprises. The data provide a solid basis for policy analyses that explore which types of firms are responsible for international trade in goods. It answers questions like who are the firms that are engaged in foreign markets, and what are their characteristics. Both the export and import values and the number of exporting and importing enterprises are available for 26 OECD and 8 non-OECD countries: including 27 EU member states plus Canada, Costa Rica, Norway, Israel, Turkey, the United Kingdom and the United States. Data for the United Kingdom haven't been updated since reference year 2018, for Korea and Mexico since reference year 2015. The database consists of ten datasets presenting various combinations of breakdowns by economic activity, employment size class, concentration of trade, partner countries, commodity, type of traders, type of ownership (foreign vs. domestic), exports intensity. TEC data are collected in co-operation with Eurostat and directly from National Statistical Authorities (NSOs). To create TEC data, NSOs have to attribute trade flows to enterprises with different characteristics by merging data on international trade (usually customs data) with statistical business register information on enterprises at the individual enterprise level. Related datasets: Employer Business Demography Statistics, Business Demography Statistics, Regional Business Demography, Structural Business Statistics by Size Class, Timely Indicators of Entrepreneurship by Enterprise Characteristics.

The types of services are presented according to the services classification of the 1993 Fifth edition of the Balance of Payments Manual of the International Monetary Fund (BPM5) and its detailed extension, the Extended Balance of Payments Services (EBOPS) Classification.

The TiVA database contains a range of indicators measuring the value added content of international trade flows and final demand. The indicators are derived from the 2016 version of OECD's Inter-Country Input-Output (ICIO) Database.  The ICIO has been constructed from various national and international data sources all drawn together and balanced under constraints based on official (SNA93) National Accounts by economic activity and National Accounts main aggregates.  Underlying sources used are notably:  • National supply and use tables (SUTs)  • National and harmonised Input-Output Tables • Bilateral trade in goods by industry and end-use category (BTDIxE) and  • Bilateral trade in services.  Compared to the old versions of the TiVA database, this current version includes two more countries, Morocco and Peru. The data are presented for all years from 1995 to 2011. The industry breakdown remains the same. 

The Trade in Value Added (TiVA) database consists of a set of measures that aim to provide better insights into global production networks and supply chains than is possible with conventional trade statistics.   The Origin of value added in final demand presented here, is derived from the latest version of OECD’s Inter-Country Input-Output (ICIO) database and provides estimates of final demand in country c for industry i final goods and services, broken down by the value added originating from source industry j in source country s.   In other words, it reveals how the value of final demand goods and services consumed within a country is an accumulation of value generated by many industries in many countries.   For a description of the method used for calculating these estimates using the ICIO   Domestic value added origin is shown where source country s = c and, for convenience, also represented by source country = “DXD: Domestic”.   From this data cube, a range of final demand-based measures can be derived including those in TiVA principal indicators cube such as: • Domestic value added embodied in foreign final demand, FFD_DVA and related partner shares FFD_DVApSH. • Foreign value added embodied in domestic final demand, DFD_FVA and related partner shares DFD_FVApSH.

The Trade-in Value Added (TiVA) database consists of a set of measures that aim to provide better insights into global production networks and supply chains than is possible with conventional trade statistics.   The Origin of value-added in gross imports presented here is derived from the latest version of OECD’s Inter-Country Input-Output (ICIO) database. It provides estimates of gross imports by country c of goods and services from industry in partner country/region p broken down by value-added originating from source country/region s.   In other words, the four dimensions link the imports of country c to the value-added from source country s embodied in the exports of industry in the exporting country p - thus revealing how the value of a country’s gross imports of intermediate and final products from a particular partner is an accumulation of value generated by many countries.   For a description of the method used for calculating these estimates, using the ICIO   From this data cube, a range of gross imports-based measures can be derived including the following found in the main TiVA indicators database: • Total gross imports by industry, IMGR (c, i): set exporting country p = World and source country s = World. • Domestic value-added content of gross imports by partner and industry, IMGR_DVA (c, i, p): set source country s = importing country c. • Share of IMGR_DVA in relation to IMGR: IMGR_DVAsh (c, i, p).   Note that the same value-added originating from source country s can be present in the gross imports of more than one importing country c (as embodied value-added, from upstream production, may cross national borders many times). In general, therefore, these estimates should be viewed from the perspective of an importing country c.

Trade union density: The database on Institutional Characteristics of Trade Unions, Wage Setting, State Intervention and Social Pacts (ICTWSS) was developed by Prof. Jelle Visser at the University of Amsterdam. It was first released in May 2007. In its initial form, the ICTWSS database combined data from various sources and projects with a main focus on trade union in EU and OECD countries, collective bargaining and employment relations in Europe, and social pacts. In 2021, the ICTWSS database was rebranded as the OECD/AIAS ICTWSS database to reflect the joint effort by the OECD and AIAS-HSI to ensure the continuation of the database following Prof. Visser’s retirement.

Data are collected from Ministries of Transport, national statistical offices and other institutions designated as the official data source. The survey used for this exercise is the "Investment Spending in Transport Infrastructure". The original data is collected in national currency, current values. Data are converted and published in euros, both current and constant (2015 prices). The variables collected include investment, maintenance spending and capital value of road, rail, inland waterways, maritime ports and airports. Data are published annually on 31 March. Data series start in 1995 and continue until the current year-2, or the most recent available data.

This dataset contains data on the share of the five durations - less than 1 month, >1 month and < 3 months, >3 months and <6 months, >6 months and <1 year, 1 year and over - of unemployment among total unemployment by sex and by standardised age groups (15-19, 15-24, 20-24, 25-54, 55+, total).

Early Estimates of Quarterly Unit Labour Cost (ULC) indicators for the total economy provide current edge data on ULCs and their components labour productivity and labour compensation per employed person.  Recent and more longer terms trends in productivity and competitiveness on the total economy level and by sector or activity can be found in the OECD Compendium of Productivity Indicators.Data of quarterly GDP, labour compensation and employment are sourced from the OECD Quarterly National Accounts and the Main Economic Indicators Databases.  Early Estimates of Quarterly ULCs are available for all OECD member countries (except Chile, Iceland, Mexico), as well as for the zone aggregates Euro area and OECD Total. Unit labour costs (ULCs) measure the average cost of labour per unit of output. They are calculated as the ratio of total labour costs to real output. Different from the estimates of annual ULC above, the Early Estimates of Quarterly ULC use employment and not hours worked as measure of labour input (see below "Other aspects, Recommended uses and limitations"). Quarterly ULCs can be decomposed into the components labour compensation per employee and output per person employed (employment-based labour productivity). The OECD estimates of total labour costs adjust for labour compensation of self-employed persons Every effort has been made to ensure that data are comparable across countries. The adjustment for the self-employed assumes that labour compensation per person is equivalent for the self-employed and employees. This assumption may be more or less valid across different countries and economic activities.  EEQ ULCs are also fully compatible with the ULC series published by the ECB which provides ULC series for 21 EU OECD member countries and Euro area. Those for nine Non-EU member OECD countries are compiled by the OECD following a methodology that is fully consistent with that used by the ECB.

While much of the comparative evidence on inequalities that is currently available refers to household income, wealth is a critical dimension of households’ economic well-being. How wealth is distributed is important for equity and inter-generational mobility, but also for the stability of the economic system and for its resilience to shocks. While the lack of comparative evidence in this field reflects the absence of an agreed standard that statistical offices could use when collecting this information, this gap has been addressed by the OECD with the release in 2013 of a set of statistical guidelines in this field. In 2013, the OECD issued a set of ‘Guidelines’ for micro statistics on household wealth (OECD, 2013) and an increasing number of countries have engaged in the collection of micro statistics in this field (European Central Bank, 2013). Building on these initiatives as well as others, such as the Luxembourg Wealth Study (Sierminska et al, 2006) which have informed previous OECD analysis (Jantii et al., 2008), the OECD has updated the data on the distribution of household wealth for OECD countries, based on the set of conventions and classifications proposed in the 2013 OECD Guidelines.