Organisation for Economic Co-operation and Development

Note: CPA data for 2018 and 2019 are projections from the 2016 Survey on Forward Spending Plans. Country Programmable Aid (CPA), outlined in our Development Brief  and also known as “core” aid, is the portion of aid donors programme for individual countries, and over which partner countries could have a significant say. CPA is much closer than ODA to capturing the flows of aid that goes to the partner country, and has been proven in several studies to be a good proxy of aid recorded at country level. CPA was developed in 2007 in close collaboration with DAC members. It is derived on the basis of DAC statistics and was retroactively calculated from 2000 onwards

The number of students enrolled refers to the count of students studying in the reference period. Each student enrolled in the education programmes covered by the corresponding category is counted once and only once. National data collection systems permitting, the statistics reflect the number of students enrolled at the beginning of the school / academic year. Preferably, the end (or near-end) of the first month of the school / academic year is chosen (special arrangements are made for part-year students who may not start studies at the beginning of the school year). Students are classified as foreign students (non-citizens) if they are not citizens of the country in which the data are collected. While pragmatic and operational, this classification is inappropriate for capturing student mobility because of differing national policies regarding the naturalisation of immigrants. Countries that have lower propensity to grant permanent residence to its immigrant populations are likely to report second generation immigrants as foreign students. Therefore, for student mobility and bilateral comparisons, interpretations of data based on the concept of foreign students should be made with caution. Students are classified as international students if they left their country of origin and moved to another country for the purpose of study. Depending on country-specific immigration legislation, mobility arrangements, and data availability, international students may be defined as students who are not permanent or usual residents of their country of study or alternatively as students who obtained their prior education in a different country, including another EU country.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older with a tertiary education.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible. The exact national source and reference period for each file is given in Table A.1 (see the methodological document).

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The allocation of bilateral intermediate imports across using industries assumes that import coefficients are the same for all trade partners, i.e. SHAREipkt is identical across exporter countries. Hence, the bilateral pattern of imported intermediates from industry p is the same across all using industries k. However, it is different from the bilateral pattern of total imports from industry p because trade data (measured by VALUEijpt) allows distinguishing bilateral imports of intermediates from final good imports in industry p. While the BEC classification enables the identification of intermediate goods, no similar classification is available for trade in services, due to the high level of aggregation in services trade data. While goods trade data are based on customs declarations allowing the identification of goods at a highly disaggregated level, services trade data are based on a variety of information such as business accounts, administrative sources, surveys, and estimation techniques (Manual on Statistics of International Trade in Services, 2002). Hence, in the case of trade in services, VALUEijpt is the total value of imports of service p, i.e. both final and intermediate (and not only services that are used in the production of other goods and services, as in the case of goods data). By making an additional assumption and adjusting SHAREipkt, it is however possible to calculate trade in intermediate services. In the case of services imports, SHAREipkt is the share of imported service inputs p used by industry k in total imports of p of country i. In the case of services, besides the assumption that all trading partners have the same distribution of intermediate imports p across using industries k, it is furthermore required that the share of intermediate services in overall bilateral services imports of country i is the same across all partner countries j. Finally, it should be mentioned that trade data reported in the trade statistics do not fully match imports as reported in I-O tables. One main reason is that while trade data is recorded at consumer prices, I-O tables are evaluated at producer prices. There are also other differences such as the treatment of re-exports, scrap metal, waste products and second hand goods or unallocated trade data.

This dataset presents patent statistics and indicators that are suitable for tracking innovation in environment-related technologies. They allow the assessment of countries and firms' innovation performance as well as the design of governments' environmental and innovation policies.

This dataset contains the number of people who graduated from an education programme by country of origin and sex.

This table contains figures on affiliates under foreign control by investing country in the total manufacturing, total services and total business enterprise sectors.

The Maritime Transport Costs (MTC)database contains data from 1991 to the most recent available year of bilateral maritime transport costs. Transport costs are available for 43 importing countries (including EU15 countries as a custom union) from 218 countries of origin at the detailed commodity (6 digit) level of the Harmonized System 1988. This dataset should only be used in conjunction with the paper Clarifying Trade Costs in Maritime Transport which outlines methodology, data coverage and caveats to its use. Key Statistical Concept Import charges represent the aggregate cost of all freight, insurance and other charges (excluding import duties) incurred in bringing the merchandise from alongside the carrier at the port of export and placing it alongside the carrier at the first port of entry in the importing country. Insurance charges are therefore included in the transport cost variables and are estimated to be approximately 1.5% of the import value of the merchandise.

This table contains figures on the activity of affiliates located abroad by host country in the total manufacturing, total services and total business enterprise sectors. The units used to present data in AMNE are millions of national currency for monetary variables and units for the other variables. Monetary variables are in current prices. Euro-area countries: national currency data is expressed in euro beginning with the year of entry into the Economic and Monetary Union (EMU). For years prior to the year of entry into EMU, data have been converted from the former national currency using the appropriate irrevocable conversion rate. This presentation facilitates comparisons within a country over time and ensures that the historical evolution is preserved. Please note, however, that pre-EMU euro are a notional unit and should not be used to form area aggregates or to carry out cross-country comparisons.

The SIGI is built on 27 innovative variables measuring discriminatory social institutions, which are grouped into 4 dimensions: discrimination in the family, restricted physical integrity, restricted access to productive and financial resources, and restricted civil liberties.Lower values indicate lower levels of discrimination in social institutions: the SIGI ranges from 0% for no discrimination to 100% for very high discrimination.